Control cabinet floor plate, type SBB
The control cabinet floor plate can be installed in Rittal (type CM and TS8) control cabinets. Up to 5 cable entry systems, type KDL/E 24 can be installed. Locking plates, type VP24, are included with the control cabinet floor plates. These are required to lock the floor sheeting into place.Non-required cut-outs can be closed with the BP/H 24 blanking plate.
- Protection class IP 54 when installed properly as a system (control cabinet + floor sheeting)
- Entire system can be retrofitted
- Earthing points (M6 and M8) available on both sides
| Type | Order no. | for control cabinet | Location spaces | Plate thickness | A | B | Pack qty. |
|---|---|---|---|---|---|---|---|
| SBB 460 - 2000 | 87821020 | 600 mm | 2 x KDL/E 24 / BP/H | 1.5 mm | 464 mm | 100 mm | 1 |
| SBB 660 - 3000 | 87821040 | 800 mm | 3 x KDL/E 24 / BP/H | 1.5 mm | 664 mm | 100 mm | 1 |
| SBB 860 - 5000 | 87821050 | 1000 mm (without central strut) | 5 x KDL/E 24 / BP/H | 1.5 mm | 864 mm | 100 mm | 1 |
| SBB 420 - 2000 | 87821010 | 1000 mm (with central strut) | 2 x KDL/E 24 / BP/H | 1.5 mm | 424 mm | 100 mm | 1 |
| SBB 520 - 3000 | 87821030 | 1200 mm (with central strut) | 3 x KDL/E 24 / BP/H | 1.5 mm | 524 mm | 100 mm | 1 |
| Replacement part: | |||||||
| VP 24 | 87821090 | 5 |