Global Innovator in the Manufacture and Supply of Injection Molded Cable Management Products
513-201-3069
Over 100 variants. Which one is right for you?
From wrap-around labels to inscribed aluminum circular blanks.
High-quality, fully transparent label sleeves for labeling wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS or DM.
High-quality, fully transparent label sleeves for labeling wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS or DM.
High-quality, blue-colored flexible label sleeves for labeling wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS or DM.
High-quality, blue-colored flexible label sleeves for labeling wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS or DM.
High-quality, fully transparent, halogen-free label sleeves for labeling wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS or DM. Seven versions are available covering the entire core cross section range from 0.22 - 50 mm . The sleeves come in different lengths.
High-quality, halogen-free two-part label sleeve for extreme demands. The geometry of the sleeve causes a minimum increase in the diameter of the cable. The trapezoidal design makes for rapid and simple installation. It serves to hold the idents (BK) and the ACS labels type KS or DM. Six versions are available covering the entire core cross section range from 0.14 - 240 mm . The sleeves come in different lengths.
High-quality, halogen-free two-part label sleeve for extreme demands. The geometry of the sleeve causes a minimum increase in the diameter of the cable. The trapezoidal design makes for rapid and simple installation. It serves to hold the idents (BK) and the ACS labels type KS or DM .Six versions are available covering the entire core cross section range from 0.14 - 50 mm .
Label holder for wire, cable and conduit labels. They hold the idents (BK) and the ACS labels type KS, KSO or DM. The label holders are fixed in place with cable ties.
Individual label holder for wire, cable and conduit labels. They hold the ACS labels type KS, KSO or DM. The label holders are fixed in place with cable ties. The auxiliary tool can be used to cut the label sleeve to convenient lengths for specific purposes. The tool can process materials KM 9 and KM 15 without resetting.
High-quality, blue-colored flexible label holders for labeling wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS, KSO or DM. The label holders are fixed in place with cable ties.
Halogen-free label holder for wire, cable and conduit labels. They hold the idents (BK) and the ACS labels type KS, KSO or DM. The label holders are fixed in place with cable ties.
High-quality, halogen-free, two-part label sleeve for the most exacting requirements in the labeling of wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS or DM. The label holders are fixed in place with cable ties. It matches the appearance of label sleeve KTH/Q.
The KM sealing plug seals the KM and KMH grommets waterproof again. Using the the sealing plug enables required labeling all over the wet areas of the plant in a long-term manner. The sealing plugs are available in a wide variety of own colors in order to identify different media. Sealing plugs for KM and KMH label sleeves in 9 and 15 mm widths.
Mounting clip for laying the ASI bus cable. Simple screwing or riveting mounting clip, for fastening and routing the ASI bus cable. The glide rail is simply slid into the guide channel section.
A KM 4/x series label can be latched into the mounting clip as bus cable labeling.
Halogen-free label holder for retrofit labeling of single wires and cables. They hold the idents (BK) and the ACS labels type KS or DM. The label holders are fixed in place manually. Five versions are available covering the entire core cross section range from 0.25 - 10 mm .
Pre-inscribed murr-fix idents made from special PVC. The individual labels come on plastic strips, each containing 20 labels. BK 23: Label width 2.3 mm (A); Label height 4.0 mm (B) Font width 1.6 mm; font height 3.5 mm; black lettering BK 30: Label width 3.0 mm (A); Label height 4.0 mm (B) Font width 2.0 mm; font height 3.5 mm; black lettering BK 30.
High-quality, halogen-free round label plate (PC circular blank) for subsequent labelling of cables, lines and conduits.
Fastened with either a cable tie or the S-hook.
High-quality, halogen-free, universal label. The KS 4/x label is used with sleeves KT, KTH, KTHQ or holders KM, KMH, KMHQ or KTN on wires, cables, lines or conduits.
Only the long mat version (KS L) labels are to be used with the mp-LM laser series.
High-quality, halogen-free, divisible label plate. The label plate KS 4/x is used with sleeves KT, KTH, KTHQ or holders KM, KMH, KMHQ or KTN on wires, cables, lines or conduits. The label plate is available in various colors. The divisible part of the KS 4/18-12 is used as a record of the necessary connection data. The label plate KS 4/30-70 can be cut to length in steps of 10 mm if required for labels longer than 30 mm.
High-quality, halogen-free, universal label plate. The label plate KS 15/x is mounted with the KM holders on cables, lines or conduits. The label plate is available in various lengths and colors. The large printable area at the top allows room for individual project reference, dispensing with the need to organize additional systems.
High-quality, halogen-free, universal label plate for single-line and multi-line inscription. The KSO label is used with sleeves KT... or holders KM, KMH on cables, lines or conduits. The label plate is available in various lengths and colors. The large printable area at the top allows room for individual project reference, dispensing with the need to organize additional systems.
ACS label plates of the KDE type are pushed directly onto single wires. The inscription can be changed at a later date by unclipping the KNDW holder without removing the wire. The KNDW holder and KNDT cover may only be used in conjunction with KDE 1 and KDE 2 label plates.
ACS labels of the KSE type are pushed directly onto single wires.
Two sizes cover the wire cross sections from 0.25 – 1.5 mm².
Available in white
High-quality, halogen-free label plate for subsequent direct labeling of wires. The KSN label plate can be attached to wired single cores without disconnecting them. They can be fitted easily and quickly with the MW1 assembly tool.
High-quality, halogen-free label plate for single-line and multi-line inscription. The BS label plate is mounted directly with a cable tie.
High-quality label plates to attach with cable ties directly onto the cables. Polycarbonate (PC) material, for labeling with Pulsar, p3b or plotters. Polypropylene (PP) material for labeling with Pulsar
Self-laminating, high-quality polyester labels for single-line and multi-line inscription. The transparent extension strip sticks over the printable area and keeps the inscription clean and intact. The grid system allows direct removal of each label.
Your data. Our responsibility.
Thank you for your interest in our company. Data protection is of great importance for us because of our business activities!
We want you to know how much we value the protection of your data and privacy.
Our transparency documents in accordance with Art. 13 and 14 and 21 of the Basic Data Protection Ordinance (DS-GVO) are available for download here:
