Thermal transfer systems

Murrplastik - pavonis

The pavonis thermal transfer printer offers high-resolution 300 dpi printing at 127 mm per second. The ribbon holding system for 300 m rolls reduces the frequency at which print film needs to be changed. The cutting mechanism supplied with the printer makes print process handling even easier.
Specifications

• Print speed: 50.8 – 127 mm/s
• Max. printing width: 106 mm
• Colour ribbon roll: 300 m, 25.4 mm core diameter
• Label roll: 127 mm outside diameter
• Memory: 4 MB Flash, 8 MB SDRAM, SD card reader up to 4 GB
• Material width: 20 to 112 mm
• Thickness: 0.06–0.19 mm, max. 150 g/m²

Included with the printer

• pavonis desktop printer
• Power cable
• Power unit
• USB data cable
• Roll coil for labels
• Roll coil for the ribbon
• Empty roll core for rewinding the ribbon
• Pre-installed cutter
• pavonis CD

pavonis-data-sheet.pdf

TEP polyester labels

Polyester 50 m film with a slight gloss and a surface coating to ensure outstanding color fixing when lettering using thermal transfer print systems and synthetic resin-based thermal transfer ribbons. The smooth surface of the material enables full-coverage color transfer, ensuring precise lettering. The polyester labels are suitable for adhesion to metal, gloss paints and high surface energy plastics. The permanent acrylate adhesive exhibits high initial adhesion and at least 1006 N/m FTM 1 on steel after 72 hours. The silvered polyester labels are UL-approved for printing using the thermal transfer method with our resin-based color ribbons.<br><br>Suitable for:

• Labeling operating equipment in weatherproofed areas
• Component parts with smooth surfaces
• Component parts without bulges or corners

TEG: Fabric labels

This self-adhesive woven nylon fabric is both flexible and tear-resistant. Fabric labels have a surface coating to ensure outstanding color fixing when lettering using thermal transfer print systems and resin- or wax/resin-based thermal transfer ribbons. The permanent acrylate adhesive exhibits high initial adhesion, meaning labels can be processed easily. These labels are especially suited for tagging electrical systems, identifying operating facilities, for adhesion over edges or radiuses, for cable marking or for use in switch cabinet installations.<br><br>Suitable for:

• All types of operating equipment labeling
• Component parts with smooth and structured surfaces
• Component parts with/without bulges or corners

TES: Self-laminating cable tags

These self-laminating cable tags are ideal for labeling cables, lines and wiring. On the upper edge, they are provided with a printable, colored box and can be removed easily from the backing paper after printing. To provide additional protection from external environmental factors, the labeling is wrapped with the self-adhesive laminate.<br>In addition, the backing paper is printed with precisely-dimensioned stripes for optimum sensor detection. The special film is only 0.05 mm thick, clings well and is highly flexible. This ensures that the cable tag will not peel back up, even when used for cables with small diameters. The high-transparency laminate ensures the printed lettering remains easy to read. These cable tags can be printed using the Murrplastik Pavonis.<br><br>Suitable for:

• Wiring and cable labeling

FHW - Color ribbons based on a resin/wax mix

Ribbons based on a mix of resin and wax are ideal for printing onto matte synthetic films and laminated/coated papers, matte polyesters, polypropylene, polyolefins (shrink-wrap films), polyethylene, vinyl (PVC) and polyimides. They can also be used to print smooth and glossy synthetic films<br> <br> Printing takes place at room temperature. In general, printing with FHW resin-wax ribbons offers a broad field of applications for almost all materials with a medium to low level of durability requirements.<br> <br> The FHW resin-wax ribbons are 300 m long and outside-wound. This means they are suited for printing with the Murrplastik Pavonis. For printing with the Brady BBP11, 74 m-long color ribbons are available.

FH: Resin-based ribbons

The FH resin-based color ribbons are ideal for printing on glossy synthetic films.<br> <br> Printing takes place at high temperatures for optimum durability.<br> <br> The field of application for FH resin-based ribbons is, naturally, synthetic labels with a need for high durability.<br> <br> While the FH series already offers good smudge-proof qualities at optimum printing temperature, the FH+ series is smudge- and scratch-proof, and is also resistant to many cleaning agents and oils.<br> <br> Optimum durability is offered by the FH+ range, which is resistant to handling with most industrial cleaners and oil vapours.<br> <br> The FH resin-based ribbons are 300 m long and outside-wound. This means they are suited for printing with the Murrplastik Pavonis. For printing with the Brady BBP11, 74 m-long color ribbons are available.

mp-TM EOS1

cab EOS1 is the compact label printer, when space is limited at the workstation. For label rolls up to a diameter of 155 mm.

• Compact label printer
• Simple and clear touch screen operation
• Replacing consumable parts (print head, print plates) without tools
• Automatic centring of the label roll
• Easy cleaning without additional tools

Scope of delivery

• cab EOS1 label printer
• Power cable
• USB data cable
• Operating manual
• CD (ACS software, driver, operating instructions)
• Optional accessories
• Cutters
• External unwinder

NOT suitable for ST-BT-H Rail technology taped and ST-ECO taped shrink tubes

EOS1-data-sheet.pdf

mp-TM Squix 4/M

Thermal transfer printer for industrial use with one print head and centered material feed.

Preference for heat shrink, labels and the materials of the KC* series. 

No print head adjustment for materials of varying widths.

Also for printing of very narrow and thick continuous-feed materials.

Printing speed may be reduced for materials with especially difficult printability.

Scope of delivery:

• mp-TM SQUIX 4/M printer
• Power cable
• USB data cable
• Operating manual
• CD (driver with instructions)

Optional accessories:

• Cutters
• Perforation blade
• External unwinder
• Internal roll holder

mp-TM-SQUIX-4M.pdf

mp-TM XD4T Twin

Thermal transfer printer with two a print heads and material centering device.
The preferred equipment for double-sided printing of heat-shrink conduits and important for printing continuous heat-shrink conduits.The mp-TM XD4T Twin is not able to print one-sided! No print head adjustment for materials of varying widths. Also for printing of very narrow and thick continuous-feed materials. Printing speed may be reduced for materials with especially difficult printability.
Scope of delivery

• mp-TM XD4T Twin printer
• Power cable
• USB data cable
• Operating manual
• CD (driver with instructions)

Optional accessories

• Cutters
• Perforation blade
• External unwinder

TM-XDT4-Twin-thermal-printer.pdf