Innovatore globale nella produzione e fornitura di prodotti per la gestione dei cavi stampati ad iniezione 513-201-3069
Prodotti » Sistemi passacavo » Sistemi di listelli passacavo per cavi intestati » KDL cable entry system » Cable entry system, type KDL

Cable entry system, type KDL

Cable entry system, type KDL

The KDL is a cable entry system for inserting pre-assembled cables. The types KDL 16 /xx fit on cut-outs for 16-pin connectors, the types KDL 24 /xx fit on cut-outs for 24-pin connectors, from Harting or Wieland.

  • Simple mounting of pre-assembled cables
  • Fits standard cut-outs
  • Simple strain relief for cables using cable ties
  • EMC solution with discharge plate, simple realization

KDL-cable-entry-data-sheet.pdf

Type Order no. Color Number of openings small / large A B Installation height a b c d e Pack qty.
for standard cut-outs, size 16
KDL 16 / 2 87171010 black - /  2 116 mm 58 mm 10 mm 86 mm 36 mm 51.5 mm 16 mm 5.5 mm 1
KDL 16 / 4 87171012 black 4  / - 116 mm 58 mm 10 mm 86 mm 36 mm 51.5 mm 16 mm 5.5 mm 1
KDL 16 / 2 87171050 grey - /  2 116 mm 58 mm 10 mm 86 mm 36 mm 51.5 mm 16 mm 5.5 mm 1
KDL 16 / 4 87171052 grey 4  / - 116 mm 58 mm 10 mm 86 mm 36 mm 51.5 mm 16 mm 5.5 mm 1
Spare parts:
Replacement seal KDL 16 87980005 1
for standard cut-outs, size 24
KDL 24 / 3 87171014 black 1  /  2 146 mm 58 mm 10 mm 112 mm 36 mm 65 mm 16 mm 5.5 mm 1
KDL 24 / 5 87171016 black 5  / - 146 mm 58 mm 10 mm 112 mm 36 mm 65 mm 16 mm 5.5 mm 1
KDL 24 / 3 87171054 grey 1  /  2 146 mm 58 mm 10 mm 112 mm 36 mm 65 mm 16 mm 5.5 mm 1
KDL 24 / 5 87171056 grey 5  / - 146 mm 58 mm 10 mm 112 mm 36 mm 65 mm 16 mm 5.5 mm 1
Spare parts:
Replacement seal KDL 24 87980004 1
Enlarged cut-out for 10  –  30 cables
KDL 2 / 10 87171017 black 10  / - 146 mm 90 mm 10 mm 120 mm 60 mm 65 mm 32 mm 5.5 mm 1
KDL 2 / 10 87171057 grey 10  / - 146 mm 90 mm 10 mm 120 mm 60 mm 65 mm 32 mm 5.5 mm 1
KDL 3 / 15 87171018 black 15  / - 146 mm 122 mm 10 mm 120 mm 96 mm 65 mm 48 mm 5.5 mm 1
Matching grommets KDT/Z; BTK 17 ; BTG 32 ; ATG; KDT/ASI; SDT/Z
Matching EMC discharge plate, type KDL-AB... in chapter "Accessories for cables entry systems and plates"
Matching label plate (See ACS catalogue): Type KSS 20 x 9 or KSS 10 x 8
The correct tool for completing the cutaway can be found in the chapter on "Punching tools".
Displaying Metric Unità