Global Innovator in the Manufacture and Supply of Injection Molded Cable Management Products 513-201-3069

Cable entry systems for pre-assembled cables

Cable entry systems for pre-assembled cables

The cable entry panel system is a split system that solves problems like introducing pre-assembled cables into enclosures, for example. Larger plugs can also be introduced into enclosures without difficulty. Various systems are available. All systems are designed to work with 16 or 24-pole connectors for the standard cut-out size for Harting and Wieland.

KDL/C, KDL/D and KDL/D Mono Cable Entry Systems

KDL/C, KDL/D and KDL/D Mono Cable Entry Systems

The type KDL/C, KDL/D and KDL/D Mono cable entry systems can be used to route up to 12 pre-assembled cables into an enclosure. Another advantage is the high protection class, IP 65, which can be achieved with the type KDL/D.

 

KDL/H-VA

KDL/H-VA

The cable entry system type KDL/H-VA is produced in stainless steel. It is based on our KDL/-C, -D & -H-system and enables the user to seal cables, which are installed in electrical cabinets after the initial installation.

  • Up to IP69K
  • Temperature range:   -30°C – 100°C
  • Fire classification:     V0 acc. to UL94
  • Flame protection:     halogen free
  • NEMA 12, 4x

Typical applications are in extremely harsh and sensitive environments where activities such as intensive cleaning are part of the daily routine:

  • Food & Beverage
  • Clean room
  • Pharmaceutical
  • Energy sector: Wind & Solar
  • Power plants
  • Building technology
  • Electro-plating
  • Construction and agricultural machines
  • Air conditioning and Heating technology
  • Infrastructure (Rail and Road)
  • Antenna construction
  • Ship building industry
  • Cleaning systems
  • Waste incineration

KDLH-VA-1-6.pdf

KDLH-VA-24-4.pdf

KDLH-VA-24-14.pdf

 

KDL/H-VA FDA

KDL/H-VA FDA

The KDL/H-VA FDA frames made of stainless steel in conjunction with the grommet holders and grommets made of TPE with FDA compliance specially modified for Murrplastik enable use in the food and pharmaceutical industry.

 

       KDH KDL H VA FDA 24 4 Set Einzelteile4KDH KDL H VA FDA 24 4 Set mit Tuellen 2kdh kdt x fda klein2

halogen free logo9 Halogen free

  • Frame: stainless steel (1.4305)           
  • Block: TPE-S
  • Grommets: TPE-S
  • Temperature range: -40 … +80°C
  • Compliance: FDA 21 CFR
  • ECOLAB-certified
  • Protection class: IP69K

EcolabFDA

KDL-H-VA-FDA-data-sheet.pdf

3D-KDLH-VA-FDA.zip

KDT-X-FDA-Cable-entry-grommets.pdf

• Standard cut-outs (16 and 24 pole)
• Easy assembly
• High packing density for up to 48 cables
• Integrated strain relief

TypeOrder No.No. Openings small / mediumMaterial
KDL/H-VA-FDA 24/12, Set 87141882 12 / 0 VA
KDL/H-VA-FDA 24/4, Set 87141880 0 / 4 VA
KDL/H-VA-FDA 16/8, Set 87141877 8 / 0 VA
KDL/H-VA-FDA 16/3, Set 87141874 0 / 3 VA
KDL/H-VA-FDA 1/6, Set 87141870 6 / 0 VA
KDL/E cable entry system

KDL/E cable entry system

The KDL/E cable entry system represents further development of the third KDL generation. The advantage here is quicker assembly at double the capacity. Optionally, the KDL/E can additionally be snapped in.

KDL cable entry system

KDL cable entry system

The KDL cable entry system is a split system that allows pre-assembled cables to be routed into an enclosure without disassembling the connectors.

KDL/EMC cable entry system

KDL/EMC cable entry system

The KDL/EMC is the metal version of the KDL. Sheath currents of shielded cables can be simply discharged in several different ways here.

KDL/S Cable entry system

KDL/S Cable entry system

The KDL/S cable entry system is a custom plate that allows various kinds of cables to be inserted to accommodate customers' requests and to be able to seal openings. The internal KDT/S grommet can be custom designed based on the customer's requirements desires.

  • Fits standard cut-outs for 16-pin plug connectors (e.g. Harting, Wieland and Rittal).
  • Individual solutions
  • Matching grommet: KDT/S

 

Divisible cable entry system KDL/M

Divisible cable entry system KDL/M

The KDL/M is a splittable cable entry for inserting pre-assembled cables. Depending on the choice of cable entry grommet, up to two cables can be introduced. The split lock nut is included within the scope of delivery.

Cable entry system, KDL-Jumbo

Cable entry system, KDL-Jumbo

The KDL-Jumbo cable entry system is used for inserting pre-assembled cables and corrugated conduits (EW & EWX corrugation). The KDL-Jumbo system is a fully split frame system that enables the quick and simple installation of 1 or 2 pre-assembled cables or corrugated conduits with a diameter of between 30 mm and 65 mm in control cabinets and terminal boxes. Particular benefits of the KDL-Jumbo:

 

  • Cable infeed without interruption
  • Very robust and completely split frame system
  • Integrated, permanent (captive) seal
  • High protection class IP65
  • Labelling with KSS 20x9 and KSS 10x8 labels
  • Integrated strain relief at the grommets
  • Fire classification V0 per UL94
  • Supply includes all mounting materials
Cable entry plate KDP 24-Multi

Cable entry plate KDP 24-Multi

The cable entry plates, type KDP -24-Multi are a combination of our KDP system and our cable entry strips KDL/E They are ideal for situations where a few cables with plugs have to be brought into the switch cabinet next to cables without plugs. The cable entry plates take up to four preassembled cables in two grommets.

Displaying Metric Units

Your data. Our responsibility.
Thank you for your interest in our company. Data protection is of great importance for us because of our business activities!
We want you to know how much we value the protection of your data and privacy.
Our transparency documents in accordance with Art. 13 and 14 and 21 of the Basic Data Protection Ordinance (DS-GVO) are available for download here: