MP 52.1
Altura interna: | 52 mm |
Largura interna: | 45 - 546 mm |
Largura externa: | 77 - 578 mm |
Raio de curvatura: | 100 - 350 mm |
Passo: | 91 mm |
Elos por metro: | 11 |
Largura interna (A) | Altura interna (B) | Largura externa (D) | Altura externa (C) |
---|---|---|---|
45 mm | 52 mm | 77 mm | 74 mm |
62 mm | 52 mm | 94 mm | 74 mm |
71 mm | 52 mm | 103 mm | 74 mm |
84 mm | 52 mm | 116 mm | 74 mm |
96 mm | 52 mm | 128 mm | 74 mm |
107 mm | 52 mm | 139 mm | 74 mm |
121 mm | 52 mm | 153 mm | 74 mm |
133 mm | 52 mm | 169 mm | 74 mm |
144 mm | 52 mm | 176 mm | 74 mm |
146 mm | 52 mm | 178 mm | 74 mm |
158 mm | 52 mm | 194 mm | 74 mm |
171 mm | 52 mm | 203 mm | 74 mm |
182 mm | 52 mm | 214 mm | 74 mm |
196 mm | 52 mm | 228 mm | 74 mm |
220 mm | 52 mm | 252 mm | 74 mm |
246 mm | 52 mm | 278 mm | 74 mm |
296 mm | 52 mm | 328 mm | 74 mm |
346 mm | 52 mm | 378 mm | 74 mm |
396 mm | 52 mm | 428 mm | 74 mm |
421 mm | 52 mm | 453 mm | 74 mm |
446 mm | 52 mm | 478 mm | 74 mm |
496 mm | 52 mm | 528 mm | 74 mm |
546 mm | 52 mm | 578 mm | 74 mm |
Raio de curvatura (R) |
---|
100 mm |
150 mm |
200 mm |
250 mm |
300 mm |
350 mm |
Característica do material - Standard (PA/Preto)
Temperatura de trabalho: | -30 - 120 ° C |
Fator de fricção-Gliding: | 0.30 |
Fator de fricção-Estático: | 0.45 |
Classificação: | In accordance to UL94 HB |
Outras informações
Especificações técnicas
Distância do curso, Gliding Lg: | 150 m |
Distância do curso, Autoportante Lf: | Veja o diagrama |
Distância do curso, fixação suspensa Lvh: | 60 m |
Distância do curso, fixação vertical Lvs: | 6 m |
rotação 90 graus não autoportante L90f: | 3 m |
Velocidade, Gliding Vg: | 5 m /s |
Velocidade, Não autoportante Vf: | 20 m /s |
Aceleração, Deslizante ag: | 25 m /s² |
Aceleração, Não autoportante af: | 30 m /s² |
Comprimento - Auto portante
FLg:
Situação ideal de instalação
FLb:
Posição satisfatória de instalação
Determinando o comprimento da esteira
L = Distância do curso
R = Radius
T = Passo
E =
Comprimento = L/2 + π × R + 2 × T + E
1 m chain = 11 x 91 mm links The fixed point of the cable drag chain should be connected in the middle of the travel distance. This arrangement gives the shortest connection between the fixed point and the moving consumer and thus the most efficient chain length.
Peso da esteira
Peso |
---|
3.347 kg/m |
Chain bracket flexible
This chain bracket offers universal connection options (top, bottom and front) and is attached to the ends of the chain like a side link. This allows the chain to move right up to the bracket. Each chain requires one male and one female bracket. M8 screws are used to secure the brackets in place. Extrusion-coated metal bushes with either a through-hole (-FB) or a threaded hole (-FG) ensure the permanent, high-strength transmission of even extreme forces onto the cable drag chain.Número da ordem | Tipo | Quantidade por embalagem |
---|---|---|
0521000056 | KA 52.1-FB Female end | 1 |
0521000057 | KA 52.1-FB Male end | 1 |
0521000058 | KA 52.1-FG Female end | 1 |
0521000059 | KA 52.1-FG Male end | 1 |
Type | Inside width A | Outside width D | E | F | F1 | G | G1 | H Ø | H |
---|---|---|---|---|---|---|---|---|---|
KA 52.1 -FB | 45 mm – 546 mm | A + 36 mm | A + 16 mm | 35 mm | 30 mm | 89 mm | 146 mm | 8.5 mm | - |
KA 52.1 -FG | 45 mm – 546 mm | A + 36 mm | A + 16 mm | 35 mm | 30 mm | 89 mm | 146 mm | - | M 8 |
Chain bracket angle
There are several options regarding the chain bracket. The fixed-point bracket (inside/bottom) and the moving end bracket (inside/top) are supplied as standard. However, any other combination can be supplied upon request. The chain bracket is fastened at the end like a side link. This enables the chain to move right up to the bracket. Each chain requires one male and one female bracket. The brackets should be fastened with M6 screws.Número da ordem | Tipo | Quantidade por embalagem |
---|---|---|
0521000050 | KA 52.1 Female end | 1 |
0521000051 | KA 52.1 Male end | 1 |
Type | Inside width A | B | C | Outside width D | F | G | G1 | H Ø | I |
---|---|---|---|---|---|---|---|---|---|
KA 52.1 | 45 mm – 546 mm | A - 2.5 mm | A + 34.5 mm | A + 32 mm | 32 mm | 95.5 mm | 149 mm | 6.5 mm | 14 mm |
Bottom and top / outside
Bottom and top/inside
Front/Outside
Front/inside
Assembly instruction flexible chain bracket
Brass bushes guarantee long-lasting fastening without cold flow in the plastic.
Version KA-FB: Integrated through-hole fastened down using screw and nut.
Version KA-FG: Built-in threads allow for quick and easy on-site mounting, since a screw, including a retaining washer where necessary, is sufficient.
Frame bridge strain relief plate RS-ZL
Fixed integrated frame bridge strain relief plates in the chain brackets. Tailored to all frame bridge widths up to 246 mm. May be assembled on the inside and outside flexure curves at both chain endings.
Type | Order No. | For inner width |
---|---|---|
RS-ZL 045 - 5 | 052004500010 | 45 mm |
RS-ZL 057 - 5 | 052005700010 | 57 mm |
RS-ZL 062 - 5 | 052006200010 | 62 mm |
RS-ZL 071 - 5 | 052007100010 | 71 mm |
RS-ZL 084 - 5 | 052008400010 | 84 mm |
RS-ZL 093 - 5 | 052009300010 | 93 mm |
RS-ZL 096 - 5 | 052009600010 | 96 mm |
RS-ZL 104 - 5 | 052010400010 | 104 mm |
RS-ZL 107 - 5 | 052010700010 | 107 mm |
RS-ZL 121 - 5 | 052012100010 | 121 mm |
RS-ZL 133 - 5 | 052013300010 | 133 mm |
RS-ZL 144 - 5 | 052014400010 | 144 mm |
RS-ZL 146 - 5 | 052014600010 | 146 mm |
RS-ZL 158 - 5 | 052015800010 | 158 mm |
RS-ZL 164 - 5 | 052016400010 | 164 mm |
RS-ZL 171 - 5 | 052017100010 | 171 mm |
RS-ZL 182 - 5 | 052018200010 | 182 mm |
RS-ZL 196 - 5 | 052019600010 | 196 mm |
RS-ZL 208 - 5 | 052020800010 | 208 mm |
RS-ZL 220 - 5 | 052022000010 | 220 mm |
RS-ZL 233 - 5 | 052023300010 | 233 mm |
RS-ZL 246 - 5 | 052024600010 | 246 mm |
Strain relief with bow clamps
C-rails (cathodic dipped) for permanent integration, for accommodating the Steel Fix bow clamps in the chain brackets. The bow clamps can take up to 3 cables and are suitable for C-rails with a groove width of 11 mm. Due to the design of the trough elements, a cable preserving cable guidance is ensured. May be assembled on the inside and outside bends at both chain endings. The overall height stated is a guide only. The actual height is, amongst other things, dependent on the diameter and the quality of the cable. A safety distance of 10 mm at the fixed point above the strain relief must be kept during gliding applications.
Extender frame bridge
Large-diameter conduits are routed securely by using a bracket bar (BS). This bar is installed on the frame bridges or the covers of the cable drag chain. The bracket bar can be installed on both the inside and outside bend. The bracket bar support (BSH) is used to attach the bars to PowerLine series frame bridges. Two bracket bar supports are required for each bar. On closed covers and the frame bridges of the HeavyLine series, the bracket bars are secured with screws.
Type | Order No. | Designation | Max conduit dia. | Installation height | Min inner chain width |
---|---|---|---|---|---|
BS 120 - 5 | 052412000000 | Extender frame bridge | 115 mm | 140 mm | 164 mm |
BS 153 - 5 | 052415300000 | Extender frame bridge | 148 mm | 170 mm | 208 mm |
BS 187 - 5 | 052418700000 | Extender frame bridge | 182 mm | 205 mm | 233 mm |
BSH- 5 | 052400000000 | Extender frame bridge holder |
Separator
We recommend that separators be used if multiple round cables or conduits with differing diameters are to be installed. An offset configuration of the separators is advisable.
TR 52
TR 52.1
TR 52-V
RTT 52
Type | Order No | Designation | Version | TI | TA | H | H1 | H2 | H3 | H4 | H5 | HI |
---|---|---|---|---|---|---|---|---|---|---|---|---|
TR 52 | 052000009200 | TR 52 Separator | lockable | 3.5 mm | 10 mm | 4.2 mm | 16.3 mm | 22.3 mm | 28.2 mm | 33.8 mm | 39.8 mm | 52 mm |
TR 52.1 | 052100009200 | TR 52.1 Separator | lockable | 3.5 mm | 8 mm | 4 mm | 15.6 mm | 22 mm | 28.2 mm | 34.6 mm | 41 mm | 52 mm |
TR 52 -V | 052000009300 | TR 52 -V Separator | moveable | 3.5 mm | 13 mm | 4 mm | 16.3 mm | 22.3 mm | 28.2 mm | 33.8 mm | 39.8 mm | 52 mm |
RTT 52 | 100090522000 | Shelf support, divisible | lockable | 7 mm | 8 mm | 4 mm | 15.6 mm | 22 mm | 28.2 mm | 34.6 mm | 41 mm | 52 mm |
H-shaped shelf unit
One-piece shelving system, the shelf cannot be varied in height. Insert to obtain additional levels in pre-defined window distances.
Type | Order No. | WA | WI | H1 | H2 | HI |
---|---|---|---|---|---|---|
RE 36 / 17 | 100000361714 | 42.5 mm | 36.5 mm | 31 mm | 17.4 mm | 52 mm |
RE 59 / 24 | 100000592414 | 65 mm | 59 mm | 24.2 mm | 24.2 mm | 52 mm |
RE 81 / 12 | 100000811214 | 87.5 mm | 81.5 mm | 36 mm | 12.4 mm | 52 mm |
Shelving system
In connection with at least two shelf supports (RTT) the shelf becomes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, whilst also avoiding excessive friction. Pre-assembly is not necessary as the shelving system and cabling can be assembled quickly and easily on site.
Type | Order No. | Width | For inner width |
---|---|---|---|
RB 028 - 5 | 100000002800 | 28 mm | 45 mm |
RB 034 - 5 shelf 034 - 5 mm | 1000003405 | 33.6 mm | 45 mm |
RB 039 - 5 shelf 039 - 5 mm | 1000003905 | 39.2 mm | 45 mm |
RB 045 - 5 shelf 045 - 5 mm | 1000004505 | 44.8 mm | 57 mm |
RB 050 - 5 shelf 050 - 5 mm | 1000005005 | 50.4 mm | 57 mm |
RB 056 - 5 | 100000005601 | 56 mm | 62 mm |
RB 062 - 5 shelf 062 - 5 mm | 1000006205 | 61.6 mm | 62 mm |
RB 067 - 5 shelf 067 - 5 mm | 1000006705 | 67.2 mm | 84 mm |
RB 073 - 5 shelf 073 - 5 mm | 1000007305 | 72.8 mm | 84 mm |
RB 078 - 5 shelf 078 - 5 mm | 1000007805 | 78.4 mm | 84 mm |
RB 084 - 5 | 100000008400 | 84 mm | 84 mm |
RB 090 - 5 shelf 090 - 5 mm | 1000009005 | 89.6 mm | 96 mm |
RB 095 - 5 shelf 095 - 5 mm | 1000009505 | 95.2 mm | 96 mm |
RB 101 - 5 shelf 101 - 5 mm | 1000010105 | 100.8 mm | 107 mm |
RB 106 - 5 shelf 106 - 5 mm | 1000010605 | 106.4 mm | 107 mm |
RB 112 - 5 | 100000011200 | 112 mm | 121 mm |
RB 118 - 5 shelf 118 - 5 mm | 1000011805 | 117.6 mm | 121 mm |
RB 123 - 5 shelf 123 - 5 mm | 1000012305 | 123.2 mm | 133 mm |
RB 129 - 5 shelf 129 - 5 mm | 1000012905 | 128 mm | 133 mm |
RB 134 - 5 shelf 134 - 5 mm | 1000013405 | 134.4 mm | 144 mm |
RB 140 - 5 | 100000014000 | 140 mm | 144 mm |
RB 146 - 5 shelf 146 - 5 mm | 1000014605 | 145.6 mm | 158 mm |
RB 151 - 5 shelf 151 - 5 mm | 1000015105 | 151.2 mm | 158 mm |
RB 157 - 5 shelf 157 - 5 mm | 1000015705 | 156.8 mm | 164 mm |
RB 162 - 5 shelf 162 - 5 mm | 1000016205 | 162.4 mm | 164 mm |
RB 168 - 5 | 100000016800 | 168 mm | 182 mm |
RB 174 - 5 shelf 174 - 5 mm | 1000017405 | 173.6 mm | 182 mm |
RB 179 - 5 shelf 179 - 5 mm | 1000017905 | 179.2 mm | 196 mm |
RB 185 - 5 shelf 185 - 5 mm | 1000018505 | 184.8 mm | 196 mm |
RB 190 - 5 shelf 190 - 5 mm | 1000019005 | 190.4 mm | 196 mm |
RB 196 - 5 | 100000019600 | 196 mm | 196 mm |
RB 291 - 5 | 100000029100 | 291.2 mm | 346 mm |
Crossbar connector
For frame bridges wider than 246 mm, we recommend the use of crossbar connectors. Their use prevents the frame bridge from separating due to the extra load in the chain.
Type | Order No. | Designation | TI |
---|---|---|---|
RSV 52 | 052000009600 | Crossbar connector | 7.5 mm |
RSV 52 Alu | 052000009800 | Crossbar connector for aluminium frame bridges | 7.5 mm |
Rear-facing radius
Lock button
To increase the side stability, we recommend the use of lock buttons during strong lateral acceleration or when installed "laying on the side (turned 90 degrees) without support".
Type | Order No. |
---|---|
MP 52 / 62 / 72 lock button | 0520000080 |
Guide channel systems for cable drag chains serve as trays for short travel distances and at the same time as guides for long travel distances. If no guide channel is used it is possible that the chain links may lay and move incorrectly. Especially for large bend radii as the side guidance does not exist. In most applications the cables/conduits enter the chain at a position central to the travel. This gives the shortest length of chain. In this case the chain is about half as long as the travel distance. If the chain is moved to the left (see illustration below) it simply rolls in the channel. If it is moved to the right, then it stacks on top of itself once the unsupported length has been exceeded. If the movement is further made into direction B the glide rail adjusts the difference in height and guarantees the minimum possible friction. This ensures the optimum free and correct running of the cable drag chain.
Montagem
Desmontada
Caso o formato CAD que você não deseja listar, entre em contato com nossa equipe de suporte.