Type KGM (plastic lock nut)
The type KGM plastic lock nut is made of self-extinguishing polyamide and is available with metric or Pg thread. Usable for all corresponding hose and cable fittings, preferably with plastic threads.
In our accessories section, you will find lock nuts, dummy plugs, thread reducers, thread expanders, O-rings, angle brackets, conduit clamps, spiral strips, fixing rivets, cable ties, screw and adhesive holders and cable tie bars.
The type KGM plastic lock nut is made of self-extinguishing polyamide and is available with metric or Pg thread. Usable for all corresponding hose and cable fittings, preferably with plastic threads.
The GM type lock nut is made of brass with nickel plating. It is available with metric or Pg thread and usable for all corresponding conduit and cable fittings, preferably with metal threads.
The type BST blind plug is made of brass with nickel plating. It is available with metric or Pg thread and can be used as a temporary filler for holes currently not needed in the control cabinet.
IP 65 protection rating can be achieved using an additional type OR O-ring. (O-ring is not included in the delivery)
The type ET end sleeve is made of TPE and is used, for example, to close off the open end of a protective conduit, or as centring device for exiting lines.
The end sleeve features the following advantages:
The type EK end cap is made of specially modified polyamide and mounted on the ends of the cable protection conduits. The end cap is designed as an edge protector so that exiting cables cannot be damaged and the visual effect of the installation is improved.
The type BWM fastening bracket is made of sheet steel with zinc plating. It is used as a universal holder for fastening fittings to equipment and machinery.
The fastening bracket features the following advantages:
The type BSTK blind plug is made of specially modified polyamide and is available with metric or Pg thread. For instance, it can be used as a temporarily filler for holes currently not needed in the control cabinet.
IP 65 protection rating can be achieved using an additional type OR O-ring. (O-ring not included in the delivery)
The thread reducing bush is made of specially modified polyamide and is available with metric or Pg thread.
They are to be used with an additional type OR O-ring. (O-ring is not included in the delivery)
The type RR thread reducing bush is made of brass with nickel plating. It is available with metric or Pg thread and depending on the type, as a knurled or hexagon version.
The following versions of the thread reducing bush are available:
Metric/metric
Metric/Pg
Pg/Pg
The type ER/EG thread extension bush is made of brass with nickel plating. They are available with metric or Pg thread and depending on the type, as a round or hexagon version. The thread extension bush fittings are in part already equipped with an O-ring on the external thread (see identification).
The following versions of the thread extension bush are available:
The type SS conduit clamps are made of sheet steel with zinc plating. They are used for fixing or securing the protective conduits.
The type SSG hose clamp is made of sheet steel, with a zinc plated surface and is partially covered with a halogen-free elastomer. The SSG are used for easy fixing or securing of cable protection conduits and distinguish themselves with the following advantages:
The SH screw-down holder is used to fix individual cables cost-effectively. It can be screwed or riveted to any surface.
Adhesive holder, plastic. The retention force can be increased by additional fastening with a screw. If pressure sensitive adhesives are used, the surface must be smooth and free of dust and grease. Contaminated surfaces must be cleaned with proper cleaning agents.
Spiral tapes are used to bundle cable harnesses efficiently and simply. The spiral tapes also protect the insulation of the wires. Branches of single wires or looms of cables may be made at any place. Bundling in the range from 2 - 100 mm is possible with just three sizes.
The SBF consists of flame-retardant material
Plastic expansion rivets for the quick installation of components, e.g. cable ducts.
The KSP 47.5 edge protection profile is manufactured of specially modified thermoplastic rubber. Materials are self-extinguishing, halogen-free and tested according to EN 45545-2:2013 standards.
Exceptional mechanical properties characterize the edge protection profile, it is abrasion-proof and fixed on a pre-set hole pattern.
The type OR-NBR O-ring is manufactured from NBR and serves to seal off threaded connections for higher protection classes, i.e. at threaded cable fittings.
The O-rings can be used for the following thread types, according to size:
The KAW 90° plastic connector angle is a foldable angle connector, made of specially modified polyamide. It can be combined in any way with cable fittings or conduit fittings.
The connector angle features the following advantages:
Your data. Our responsibility.
Thank you for your interest in our company. Data protection is of great importance for us because of our business activities!
We want you to know how much we value the protection of your data and privacy.
Our transparency documents in accordance with Art. 13 and 14 and 21 of the Basic Data Protection Ordinance (DS-GVO) are available for download here: