World Leader in the Manufacture and Supply of Injection Molded Cable Management Products 513-201-3069

CAM engraving machine

CAM engraving machine

The robust, all-rounder systems for engraving and processing lightweight milling work.

CAM engraving machine

CAM engraving machine

CAM 100 complete system
Complete engraving system for Duomatt, Alumatt and aluminium labelling materials and other materials suitable for engraving. The Murrplastik complete system consists of the 3-axis mechanism, accessories and the control devices; they are offered in various sizes.
Scope of delivery - complete system:

  • Basic system including control unit
  • A complete set of cables for connecting the axes with the controller, as well as the controller and the computer
  • Spindle 170 E
  • Vacuum table with chip vacuum pump *
  • Suction equipment (without vacuum)
  • Cooling / misting device
  • * If no compressed air supply is available, it will be necessary to order an electric vacuum pump instead of the standard chip vacuum pump.

General technical data

  • Positioning range X/Y 330 x 290 mm, stroke 75 mm
  • Clamping surface 500 x 600 mm
  • General mechanical data
  • Flat surface milled, face accuracy < 0.05 mm
  • x/y/z infeeds, backlash-free, with stepped motor drive
  • 3 ball screw drives, 16 x 5 mm with flange bearings
  • Rubber cover with Teflon coating
  • Repeat accuracy +/- 1/100 mm
  • 3 end and reference switches, accuracy < 1/100 mm
  • Cable drag chains
  • Easy to maintain structure
  • Technical data for electronics
  • 19” table housing
  • 230 V power supply
  • Connection to computer through serial interface
  • Expanded HPGL command set
  • Triaxial controlling

CAM-100-data-sheet.pdf

CAM engraving system accessories

CAM engraving system accessories

Murrplastik can also supply any of the engraving machine components as individual parts. As such, you can retrofit or upgrade existing systems according to your requirements. Spindles / suction device / cooling-/ spraying appliances

CAM engraving system accessories

CAM engraving system accessories

Clamping as if by magic. We can supply a vacuum grid table matching the engraving machine model for the specific purpose of clamping our Duomatt, Alumatt and aluminium mats or for level work pieces. If there is no compressed air supply at the site of installation it will be necessary to order an electric vacuum pump instead of the standard chip vacuum pump.

CAM engraving system accessories

CAM engraving system accessories

There are various extras available to stabilise the engraving machine or lower the noise level.

Graver for engraving systems

Graver for engraving systems

Gravers are conical tools (halved solid metal round bar, ground smooth) with a cutting edge.In principle, the smaller the angle at the point, the more constant is the engraving width, even if the material to be engraved is not flat.We would recommend our special 15 gravers when working with spindles without height scanning. The overall diameter gives the minimum engraving width. The deeper it presses into the material, the wider the engraving width. The ratio of plunge depth: engraving width is predominantly determined by the angle at the point.The graver can be used in conjunction with the CAM engraving system and the engraving option.

  • Universal graver for engraving
  • For use with a wide range of materials (plastic, aluminium,...)
Milling cutter for engraving systems

Milling cutter for engraving systems

Milling cutters are conical tools with a cutting edge.The additional spiral-shaped chip flute means that the filings can be removed easily so that the engraving can be cleared free of burrs and cleanly.The milling cutter can be used in conjunction with the CAM engraving system and the engraving option.This tool has proved itself to be a veritable all-rounder!

  • Special cutter for acrylic glass engraving
  • For use with a wide range of materials (plastic, aluminium, non-ferrous metals...)
Double-fluted cutter for engraving systems

Double-fluted cutter for engraving systems

Double-fluted cutter, right-cutting with a fishtail cut, so that it can be pressed easily even into hard materials.The double-fluted cutter can be used in conjunction with the CAM engraving system and the engraving option.

  • Cost-effective universal double-fluted cutter
  • For the cutting of non-ferrous metals and plastics
Rub-out cutter for engraving systems

Rub-out cutter for engraving systems

The shorter cutting edge of the rub-out cutter means that it has less danger of breaking than the double-fluted cutter with the fishtail cut. This means that it is ideal for use with diameters of up to 1 mm. The rub-out cutter can be used in conjunction with the CAM engraving system.

  • For the cutting of non-ferrous metals
  • Ideal for harder plastics
Insulation engraver for engraving systems

Insulation engraver for engraving systems

This classy graver is a specially-developed conical tool. The cutting geometry remains the manufacturer's "secret". The result is burr-free and clean cutting grooves, which can also be used for the manufacture of PCB-prototypes, hence the name INSULATION ENGRAVER.Its long service-life and durability, even at high feed velocities, makes it an ideal engraving tool for stainless steel and titanium alloys.The insulation engraver can be used in conjunction with the CAM engraving system.

  • Specially-designed for the engraving of fine single-line lettering
  • For use with aluminium ad anodised aluminium
  • For use with harder materials, such as stainless steel and titanium)
Tool and graver sets

Tool and graver sets

We are pleased to offer you specially-designed sets containing different engraving tools. These sets provide a cost-effective means of selecting the appropriate graver or cutter for your specific application.

Coolant and degreasing agent for engraving systems

Coolant and degreasing agent for engraving systems

The use of a coolant and degreasing agent when engraving aluminium provides you with better results and extends the service life of the tool.

Dyes for engraving systems

Dyes for engraving systems

For blackening engraved lettering on silver anodised aluminium labels.

Displaying Metric Units