World Leader in the Manufacture and Supply of Injection Molded Cable Management Products 513-201-3069

Cable entry system, type KDL/E

Cable entry system, type KDL/E

The KDL/E represents the 3rd generation of Murrplastik cable entry system.

  • Even quicker mounting of pre-assembled cables
  • Snap in, meaning screwing on is no longer absolutely necessary
  • Catch hook for 1.5 – 2.0 mm plate thickness included with delivery, additional catch hooks for up to 4.1 mm plate thickness available
  • Fits standard cut-outs for connectors (e.g. Harting, Wieland and Rittal).
  • EMC solution with discharge plate, simple realisation
  • Matching grommets KDT/xE

KDL-E-data-sheet.pdf

3D-KDLE.zip

 

Type Order no. Color Number of openings small / large Installation height For plate thickness A B a b c d e Pack qty.
for standard cut-outs, size 16
KDL/E 16/2 87121010 black - / 2 15.5 mm - 116 mm 58 mm 86 mm 36 mm 51.5 mm 16 mm 5.5 mm 1
KDL/E 16/4 87121011 black 4 / - 15.5 mm - 116 mm 58 mm 86 mm 36 mm 51.5 mm 16 mm 5.5 mm 1
KDL/E 16/5 87121012 black 4 / 1 15.5 mm - 116 mm 58 mm 86 mm 36 mm 51.5 mm 16 mm 5.5 mm 1
KDL/E 16/8 87121014 black 8 / - 15.5 mm - 116 mm 58 mm 86 mm 36 mm 51.5 mm 16 mm 5.5 mm 1
If catch hooks are used, then the width of the cut-out must be enlarged by 91 mm.
for standard cut-outs, size 24
KDL/E 24/4 87121016 black 2 / 2 15.5 mm - 146 mm 58 mm 112 mm 36 mm 65 mm 16 mm 5.5 mm 1
KDL/E 24/7 87121018 black 6 / 1 15.5 mm - 146 mm 58 mm 112 mm 36 mm 65 mm 16 mm 5.5 mm 1
KDL/E 24/10 87121020 black 10 / - 15.5 mm - 146 mm 58 mm 112 mm 36 mm 65 mm 16 mm 5.5 mm 1
Matching adapter plates or floor sheeting
See chapter "Accessories for cable entry systems and plates"
Spare parts:
Catch hooks 1.5 – 2.0 mm 8712102000 black - 1.5 mm  –  2 mm 10
Catch hooks 2.1 – 2.7 mm 8712101800 black - 2.1 mm  –  2.7 mm 10
Catch hooks 2.8 – 3.4 mm 8712101600 black - 2.8 mm  –  3.4 mm 10
Catch hooks 3.5 – 4.1 mm 8712101400 black - 3.5 mm  –  4.1 mm 10
Matching grommets KDT/ZE; KDT/VE; ATG/E; SDT/ZE; BTK/E; BTG/E
Matching EMC discharge plate, type KDL/N-AB... in chapter "Accessories for cables entry systems and plates"
Matching label plate, type KS KDL/E, see catalogue ACS.
The correct tool for completing the cutaway can be found in the chapter on "Punching tools".
Displaying Metric Units