World Leader in the Manufacture and Supply of Injection Molded Cable Management Products 513-201-3069

Cable entry plate KDP 24-Multi

Cable entry plate KDP 24-Multi

The cable entry plates, type KDP 24-Multi are a combination of our KDP system and our cable entry strips KDL/E They are ideal for situations where a few cables with plugs have to be brought into the switch cabinet next to cables without plugs. The cable entry plates take up to four preassembled cables in two grommets.

  • Catch hook for 1.5 - 2.0 mm plate thickness included with delivery, additional catch hooks for up to 4.1 mm plate thickness available.

KDP-24Multi.pdf

Type Order no. Color Openings total Openings number / Ø Number of grommets Installation height A B a b c d e Pack qty.
KDP 24/10/02 87301076 black 10 4 / 3.0 – 6.5 2 15.5 mm 58 mm 146 mm 112 mm 36 mm 65 mm 16 mm 5.5 mm 1
2 / 4.5 – 8.5
4 / 8.0 – 12.5
KDP 24/14/02 87301078 black 14 4 / 2.5 – 5.0 2 15.5 mm 58 mm 146 mm 112 mm 36 mm 65 mm 16 mm 5.5 mm 1
2 / 3.0 – 6.5
8 / 4.5 – 8.5
KDP 24/15/02 87301080 black 15 2 / 1.5 – 3.5 2 15.5 mm 58 mm 146 mm 112 mm 36 mm 65 mm 16 mm 5.5 mm 1
11 / 3.0 – 6.5
2 / 8.5 – 12.5
KDP 24/17/02 87301082 black 17 17 / 3.0 – 6.5 2 15.5 mm 58 mm 146 mm 112 mm 36 mm 65 mm 16 mm 5.5 mm 1
KDP 24/20/02 87301084 black 20 4 / 1.5 – 3.5 2 15.5 mm 58 mm 146 mm 112 mm 36 mm 65 mm 16 mm 5.5 mm 1
6 / 3.0 – 5.0
10 / 3.0 – 6.5
KDP 24/21/02 87301086 black 21 21 / 2.5 – 5.0 2 15.5 mm 58 mm 146 mm 112 mm 36 mm 65 mm 16 mm 5.5 mm 1
Spare parts
Catch hooks 1.5 – 2.0 mm 8712102000 black - - 10
Catch hooks 2.1 – 2.7 mm 8712101800 black - - 10
Catch hooks 2.8 – 3.4mm 8712101600 black - - 10
Catch hooks 3.5 – 4.1 mm 8712101400 black - - 10
Matching grommets KDT/ZE; KDT/VE; SDT/ZE; BTK/E
Matching label plate, type KSS 20x9 or KSS 10x8 – see catalogue ACS.
Matching adapter plates type KDP 24/AP/xx for the assembly of multiple 24/xx/xx
in standardised cut-outs (Rittal/Lohmeier/Ensto)
see chapter "Cable entry plate KDP plastic"
The correct tool for completing the cutaway can be found in the chapter on "Punching tools".
Displaying Metric Units