World Leader in the Manufacture and Supply of Injection Molded Cable Management Products 513-201-3069

MP 35

MP 35
Internal height: 34 mm
Internal widths: 62 - 150 mm
Outside widths: 82 - 170 mm
Radii: 70 - 300 mm
Pitch: 58 mm
Links Per Meter: 17
Interior/exterior widths
Radii
Interior width (A) Interior height (B) Exterior width (D) Exterior height (C)
62 mm 34 mm 82 mm 48 mm
86 mm 34 mm 106 mm 48 mm
102 mm 34 mm 122 mm 48 mm
125 mm 34 mm 145 mm 48 mm
150 mm 34 mm 170 mm 48 mm
Radius (R)
70 mm
100 mm
150 mm
200 mm
300 mm
efk_ausst_kametwi
Chain bracket with variably positionable metal angle
efk_ausst_ohnevorsp
Radii with (RV) or without bias (RK)
efk_ausst_hreg
H-shelf for simple cable separation in the chain compartment
efk_ausst_rueckra
Back radius combinations
efk_ausst_radebeld
Frame bridges can be removed on one side
efk_ausst_zl
Strain relief plate ZL
efk_ausst_inttrlose
Integrable separator for cable separation
efk_ausst_regal
Plug-in shelf system for reliable cable guidance
efk_ausst_kametbue
Chain bracket/metal bracket

Material characteristics standard (PA/black)

Service temperature: -30 - 120 ° C
Gliding friction factor: 0.30
Static friction factor: 0.45
Fire classification: In accordance to UL94 HB

Other information on request

Technical Specifications

Travel distance, gliding Lg: 80 m
Travel distance, self-supporting Lf: See Diagram
Travel distance, vertical, hanging Lvh: 40 m
Travel distance, vertical, upright Lvs: 3 m
Rotated 90°, unsupported L90f: 1 m
Speed, gliding Vg: 3 m /s
Speed, unsupported Vf: 10 m /s
Acceleration, gliding ag: 15 m /s²
Acceleration, unsupported af: 20 m /s²

Self-supporting length

efk_ib_klap

FLg:
Ideal installation situation for high stresses at the limit of the max. travel parameters. In this range the chain upper run is still biased, straight or has a max. sag of 10 – 50 mm depending on the type of chain.

FLb:
Satisfactory installation position for many applications working in the lower to middle range of the max. travel parameters. Depending on the chain type, the sag of the chain upper run is > 10 – 50 mm but less than the max. sag. If the sag is greater than FLb, the application is critical and should be avoided. Please choose a more stable Murrplastik cable drag chain.

Determining the Chain Length

efk_bekl

L = Travel distance
R = Radius
T = Pitch
E =

Length = L/2 + π × R + 2 × T + E

1 m chain = 17 x 58 mm links The fixed point of the cable drag chain should be connected in the middle of the travel distance. This arrangement gives the shortest connection between the fixed point and the moving consumer and thus the most efficient chain length.

Chain weight

Weight
62 kg/m
86 kg/m
102 kg/m
125 kg/m
150 kg/m
Chain bracket U-part

Chain bracket U-part

The metal connection (U-section) is precisely adjusted to the respective chain width. It only needs to be snapped in the chain link. Please order one male and one female end bracket for each chain. The brackets should be fastened with M6 screws.
Order Number Type Material Pack qty.
035000007000 KA 35062 Female end Sheet steel 1
035000007100 KA 35062 Male end Sheet steel 1
035000007200 KA 35086 Female end Sheet steel 1
035000007300 KA 35086 Male end Sheet steel 1
035000007400 KA 35102 Female end Sheet steel 1
035000007500 KA 35102 Male end Sheet steel 1
035000007600 KA 35125 Female end Sheet steel 1
035000007700 KA 35125 Male end Sheet steel 1
035000007800 KA 35150 Female end Sheet steel 1
035000007900 KA 35150 Male end Sheet steel 1
035000008000 KA 35062 Female end Stainless steel 1.4301 1
035000008100 KA 35062 Male end Stainless steel 1.4301 1
035000008200 KA 35086 Female end Stainless steel 1.4301 1
035000008300 KA 35086 Male end Stainless steel 1.4301 1
035000008400 KA 35102 Female end Stainless steel 1.4301 1
035000008500 KA 35102 Male end Stainless steel 1.4301 1
035000008600 KA 35125 Female end Stainless steel 1.4301 1
035000008700 KA 35125 Male end Stainless steel 1.4301 1
035000008800 KA 35150 Female end Stainless steel 1.4301 1
035000008900 KA 35150 Male end Stainless steel 1.4301 1
Type A B D F G H Ø I
KA 35062 62 mm A - 8.5 mm 82 mm 25 mm 20 mm 7 mm 15 mm
KA 35086 86 mm A - 8.5 mm 106 mm 25 mm 20 mm 7 mm 15 mm
KA 35102 102 mm A - 8.5 mm 122 mm 25 mm 20 mm 7 mm 15 mm
KA 35125 125 mm A - 8.5 mm 145 mm 25 mm 20 mm 7 mm 15 mm
KA 35150 150 mm A - 8 mm 170 mm 25 mm 20 mm 7 mm 15 mm
efk_35_ka_ma1

Chain bracket angle

Chain bracket angle

Please order one male and one female end bracket for each chain.
Order Number Type Material Pack qty.
0350000054 KA 3508 Female end Sheet steel 1
0350000055 KA 3508 Male end Sheet steel 1
0350000056 KA 3509 Female end Stainless steel 1.4301 1
0350000057 KA 3509 Male end Stainless steel 1.4301 1
Type Inside width A B C Outside width D F G H Ø I
KA 3508/09 Female end 62 mm  –  150 mm A - 7 mm A + 28 mm 82 mm 25 mm 20 mm 7 mm 8 mm
KA 3508/09 Male end 62 mm  –  150 mm A - 12 mm A + 38.5 mm 82 mm 25 mm 20 mm 7 mm 8 mm
efk_35_ka_ma2

Angle exterior

efk_35_ka_ma3

Angle interior

Separator

efk_35_tr
We recommend that separators be used if multiple round cables or conduits with differing diameters are to be installed. An offset configuration of the separators is advisable.

H-shaped shelf unit

efk_32_hs
Insert to obtain additional levels in pre-defined window distances.

Shelving system

efk_35_rs
The shelf must be used with a minimum of two separators to create a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, whilst also avoiding excessive friction. The shelves are matched to the available chain widths.

Guide channel systems for cable drag chains serve as trays for short travel distances and at the same time as guides for long travel distances. If no guide channel is used it is possible that the chain links may lay and move incorrectly. Especially for large bend radii as the side guidance does not exist. In most applications the cables/conduits enter the chain at a position central to the travel. This gives the shortest length of chain. In this case the chain is about half as long as the travel distance. If the chain is moved to the left (see illustration below) it simply rolls in the channel. If it is moved to the right, then it stacks on top of itself once the unsupported length has been exceeded. If the movement is further made into direction B the glide rail adjusts the difference in height and guarantees the minimum possible friction. This ensures the optimum free and correct running of the cable drag chain.

Assembly

efk_35_mon_1

Step 1

efk_35_mon_2

Step 2

efk_35_mon_3

Step 3

Disassembly

efk_35_dmon_1

Step 1

efk_35_dmon_2

Step 2

Should the CAD format you desire not be listed, please contact our support team.

Displaying Metric Units