World Leader in the Manufacture and Supply of Injection Molded Cable Management Products 513-201-3069

MP 3000

MP 3000
Internal height: 26 mm
Internal widths: 26 - 125 mm
Outside widths: 44 - 143 mm
Radii: 50 - 300 mm
Pitch: 45 mm
Links Per Meter: 22
Interior/exterior widths
Radii
Interior width (A) Interior height (B) Exterior width (D) Exterior height (C)
26 mm 26 mm 44 mm 35 mm
37 mm 26 mm 55 mm 35 mm
56 mm 26 mm 74 mm 35 mm
62 mm 26 mm 80 mm 35 mm
76 mm 26 mm 94 mm 35 mm
87 mm 26 mm 105 mm 35 mm
101 mm 26 mm 119 mm 35 mm
125 mm 26 mm 143 mm 35 mm
Radius (R)
50 mm
70 mm
95 mm
120 mm
150 mm
200 mm
300 mm
efk_ausst_ohnevorsp
Radii with (RV) or without bias (RK)
efk_ausst_hreg
H-shelf for simple cable separation in the chain compartment
efk_ausst_rueckra
Back radius combinations
efk_ausst_atex
EMC cable drag chains for use in areas at risk of explosion
efk_ausst_kametein
Chain bracket with metal inserts and strain relief
efk_ausst_zl
Strain relief plate ZL
efk_ausst_radekla
Frame bridges, folding on one side
efk_ausst_inttrlose
Integrable separator for cable separation
efk_ausst_esd
EMC cable drag chains for use in areas of electrostatic discharge
efk_ausst_regal
Plug-in shelf system for reliable cable guidance

Material characteristics standard (PA/black)

Service temperature: -30 - 120 ° C
Gliding friction factor: 0.30
Static friction factor: 0.45
Fire classification: In accordance to UL94 HB

Other information on request

Technical Specifications

Travel distance, gliding Lg: 60 m
Travel distance, self-supporting Lf: See Diagram
Travel distance, vertical, hanging Lvh: 40 m
Travel distance, vertical, upright Lvs: 3 m
Rotated 90°, unsupported L90f: 0.70 m
Speed, gliding Vg: 3 m /s
Speed, unsupported Vf: 6 m /s
Acceleration, gliding ag: 10 m /s²
Acceleration, unsupported af: 15 m /s²

Self-supporting length

efk_ib_klap

FLg:
Ideal installation situation for high stresses at the limit of the max. travel parameters. In this range the chain upper run is still biased, straight or has a max. sag of 10 – 50 mm depending on the type of chain.

FLb:
Satisfactory installation position for many applications working in the lower to middle range of the max. travel parameters. Depending on the chain type, the sag of the chain upper run is > 10 – 50 mm but less than the max. sag. If the sag is greater than FLb, the application is critical and should be avoided. Please choose a more stable Murrplastik cable drag chain.

Determining the Chain Length

efk_bekl

L = Travel distance
R = Radius
T = Pitch
E =

Length = L/2 + π × R + 2 × T + E

1 m chain = 22 x 45 mm links The fixed point of the cable drag chain should be connected in the middle of the travel distance. This arrangement gives the shortest connection between the fixed point and the moving consumer and thus the most efficient chain length.

Chain weight

Weight
26 kg/m
37 kg/m
56 kg/m
62 kg/m
76 kg/m
87 kg/m
101 kg/m
125 kg/m
Chain bracket U-part

Chain bracket U-part

The chain bracket, type KA/Z 3001 - 3006, is a plastic part with extrusion-coated metal insert. The bracket is precisely adjusted to the respective chain width and only needs to be snapped in at the chain link. Please order one male and one female end bracket for each chain. The brackets should be fastened with M6 screws. The cables or tubes may be fastened with cable ties at the integrated strain relief of the chain bracket.
Order Number Type Pack qty.
030000008000 KA/Z 3001 female end 1
030000008100 KA/Z 3001 male end 1
030000008200 KA/Z 3002 female end 1
030000008300 KA/Z 3002 male end 1
030000007600 KA/Z 3002.5 female end 1
030000007700 KA/Z 3002.5 male end 1
030000008400 KA/Z 3003 female end 1
030000008500 KA/Z 3003 male end 1
030000007800 KA/Z 3003.5 female end 1
030000007900 KA/Z 3003.5 male end 1
030000008600 KA/Z 3004 female end 1
030000008700 KA/Z 3004 male end 1
030000008800 KA/Z 3005 female end 1
030000008900 KA/Z 3005 male end 1
030000009300 KA/Z 3006 female end 1
030000009400 KA/Z 3006 male end 1
Type Inside width A B C Outside width D F G H Ø I
KA/Z 3001 26 mm - - A + 18 mm - 31.5 mm 6.5 mm 18.5 mm
KA/Z 3002 37 mm A - 7 mm - A + 18 mm - 31.5 mm 6.5 mm 7.5 mm
KA/Z 3002.5 56 mm A - 8 mm - A + 18 mm - 31.5 mm 6.5 mm 7.5 mm
KA/Z 3003 62 mm A - 7 mm - A + 18 mm - 31.5 mm 6.5 mm 18.5 mm
KA/Z 3003.5 76 mm A - 8 mm - A + 18 mm - 31.5 mm 6.5 mm 18.5 mm
KA/Z 3004 87 mm A - 7 mm - A + 18 mm - 31.5 mm 6.5 mm 18.5 mm
KA/Z 3005 101 mm A - 7 mm - A + 18 mm - 31.5 mm 6.5 mm 18.5 mm
KA/Z 3006 125 mm A - 6.5 mm - A + 20 mm - 31.5 mm 6.5 mm 18.5 mm
efk_3000_ka_ma1

KA/Z 3001

efk_3000_ka_ma2

KA/Z 3002 – 3006

Chain bracket angle

Chain bracket angle

Per chain, please order 1 item with holes (left + right) and 1 item with nuts (left + right).
Order Number Type Material Pack qty.
0300000052 KA 3008 Female end Sheet steel 1
0300000053 KA 3008 Male end Sheet steel 1
0300000054 KA 3009 Female end Stainless steel 1.4301 1
0300000055 KA 3009 Male end Stainless steel 1.4301 1
Type Inside width A B C Outside width D F G H Ø I
KA 3008/3009 Female end 26 mm  –  101 mm - A + 22.5 mm A + 18 mm 25 mm 21 mm 6.5 mm 4.5 mm
KA 3008/3009 Male end 26 mm  –  101 mm - A + 31 mm A + 18 mm 25 mm 21 mm 6.5 mm 4.5 mm
KA 3008/3009 Female end 125 mm - A + 22.5 mm A + 20 mm 25 mm 21 mm 6.5 mm 4.5 mm
KA 3008/3009 Male end 125 mm - A + 31 mm A + 20 mm 25 mm 21 mm 6.5 mm 4.5 mm
KA 3008/3009 Female end 37 mm  –  101 mm A + 8.5 mm - A + 18 mm 25 mm 21 mm 6.5 mm 4.5 mm
KA 3008/3009 Male end 37 mm  –  101 mm A - 3.5 mm - A + 18 mm 25 mm 21 mm 6.5 mm 4.5 mm
KA 3008/3009 Female end 125 mm A + 8.5 mm - A + 20 mm 25 mm 21 mm 6.5 mm 4.5 mm
KA 3008/3009 Male end 125 mm A - 3.5 mm - A + 20 mm 25 mm 21 mm 6.5 mm 4.5 mm
efk_3000_ka_ma3

Bottom and top / outside

efk_3000_ka_ma4

Bottom and top/inside

Separator

efk_3000_tr
We recommend that separators be used if multiple round cables or conduits with differing diameters are to be installed. An offset configuration of the separators is advisable. The lockable separator must be used for side-mounted cable drag chains to prevent the separator from slipping down.

H-shaped shelf unit

efk_26_hs
Insert to obtain additional levels in pre-defined window distances.

Shelving system

The shelf must be used with a minimum of two separators to create a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, whilst also avoiding excessive friction. The shelves are matched to the available chain widths.

Assembly

efk_3000_mon_1

Step 1

efk_3000_mon_2

Step 2

efk_3000_mon_3

Step 3

Disassembly

efk_3000_dmon_1

Step 1

efk_3000_dmon_2

Step 2

Should the CAD format you desire not be listed, please contact our support team.

Displaying Metric Units