World Leader in the Manufacture and Supply of Injection Molded Cable Management Products 513-201-3069

MP 62.1

MP 62.1
Internal height: 62 mm
Internal widths: 93 - 518 mm
Outside widths: 125 - 550 mm
Radii: 150 - 500 mm
Pitch: 100 mm
Links Per Meter: 10
Interior/exterior widths
Radii
Interior width (A) Interior height (B) Exterior width (D) Exterior height (C)
93 mm 62 mm 125 mm 94 mm
106 mm 62 mm 138 mm 94 mm
118 mm 62 mm 150 mm 94 mm
131 mm 62 mm 163 mm 94 mm
143 mm 62 mm 175 mm 94 mm
156 mm 62 mm 188 mm 94 mm
168 mm 62 mm 200 mm 94 mm
181 mm 62 mm 213 mm 94 mm
193 mm 62 mm 225 mm 94 mm
206 mm 62 mm 238 mm 94 mm
218 mm 62 mm 250 mm 94 mm
231 mm 62 mm 263 mm 94 mm
243 mm 62 mm 275 mm 94 mm
256 mm 62 mm 288 mm 94 mm
268 mm 62 mm 300 mm 94 mm
293 mm 62 mm 325 mm 94 mm
318 mm 62 mm 350 mm 94 mm
343 mm 62 mm 375 mm 94 mm
368 mm 62 mm 400 mm 94 mm
418 mm 62 mm 450 mm 94 mm
468 mm 62 mm 500 mm 94 mm
518 mm 62 mm 550 mm 94 mm
Radius (R)
150 mm
200 mm
250 mm
300 mm
400 mm
500 mm
efk_ausst_kaflex
Chain bracket, can be fastened on three sides
efk_ausst_kametwi
Chain bracket with variably positionable metal angle
efk_ausst_rszl
Frame bridge strain relief can be integrated into chain bracket
efk_ausst_rsloes
Frame bridge/cover can be removed from inside and outside flexure curve
efk_ausst_ohnevorsp
Radii with (RV) or without bias (RK)
efk_ausst_rueckra
Back radius combinations
efk_ausst_alurs
Aluminium frame bridges with integrated lock grid in variable lengths
efk_ausst_klapreg
Foldable shelf system for reliable cable guidance

Material characteristics standard (PA/black)

Service temperature: -30 - 120 ° C
Gliding friction factor: 0.30
Static friction factor: 0.45
Fire classification: VDE 0304 IIC; UL94 HB

Other information on request

Technical Specifications

Travel distance, gliding Lg: 150 m
Travel distance, self-supporting Lf: See Diagram
Travel distance, vertical, hanging Lvh: 65 m
Travel distance, vertical, upright Lvs: 6 m
Rotated 90°, unsupported L90f: 4 m
Speed, gliding Vg: 5 m /s
Speed, unsupported Vf: 20 m /s
Acceleration, gliding ag: 25 m /s²
Acceleration, unsupported af: 40 m /s²

Self-supporting length

62.1 seflsupport

FLg:
Ideal installation situation for high stresses at the limit of the max. travel parameters. In this range the chain upper run is still biased, straight or has a max. sag of 10 – 50 mm depending on the type of chain.

FLb:
Satisfactory installation position for many applications working in the lower to middle range of the max. travel parameters. Depending on the chain type, the sag of the chain upper run is > 10 – 50 mm but less than the max. sag. If the sag is greater than FLb, the application is critical and should be avoided. Please choose a more stable Murrplastik cable drag chain.

Determining the Chain Length

efk_bekl

L = Travel distance
R = Radius
T = Pitch
E =

Length = L/2 + π × R + 2 × T + E

1 m chain = 10 x 100 mm links The fixed point of the cable drag chain should be connected in the middle of the travel distance. This arrangement gives the shortest connection between the fixed point and the moving consumer and thus the most efficient chain length.

Chain weight

Weight
118 kg/m
143 kg/m
168 kg/m
193 kg/m
218 kg/m
243 kg/m
268 kg/m
293 kg/m
318 kg/m
343 kg/m
368 kg/m
418 kg/m
468 kg/m
518 kg/m
0 kg/m
600 kg/m
Chain bracket flexible

Chain bracket flexible

This chain bracket offers universal connection options (top, bottom and front) and is attached to the ends of the chain like a side link. This allows the chain to move right up to the bracket. Each chain requires one male and one female bracket. M8 screws are used to secure the brackets in place. Extrusion-coated metal bushes with either a through-hole (-FB) or a threaded hole (-FG) ensure the permanent, high-strength transmission of even extreme forces onto the cable drag chain.
Order Number Type Version Pack qty.
0620000056 KA 62-FB Female end with bush 1
0620000057 KA 62-FB Male end with bush 1
0620000058 KA 62-FG Female end with thread 1
0620000059 KA 62-FG Male end with thread 1
Type Inside width A Outside width D E F F1 G G1 H Ø H
KA 62-FB 118 mm  –  518 mm A + 32 mm A + 17 mm 35 mm 45 mm 107 mm 171.5 mm 8.5 mm -
KA 62-FG 118 mm  –  518 mm A + 32 mm A + 17 mm 35 mm 45 mm 107 mm 171.5 mm - M8
efk_62_2_ka_ma1

Chain bracket angle

Chain bracket angle

This chain bracket offers universal connection options (top, bottom and front) and is attached to the ends of the chain like a side link. This allows the chain to move right up to the bracket. Each chain requires one male and one female bracket. M8 screws are used to secure the brackets in place. Metal inserts (supplied) help to minimize the cold flow properties. This is an enormous advantage, guaranteeing the smooth transfer of high loads to the chain.
Order Number Type Pack qty.
0620000050 KA 62 Female end 1
0620000051 KA 62 Male end 1
Type Inside width A B C Outside width D F G G1 H Ø I
KA 62 118 mm  –  518 mm A - 12 mm A + 44 mm A + 32 mm 45 mm 102 mm 171.5 mm 9 mm 15 mm
efk_62_1_ka_ma4

Bottom and top / outside

efk_62_1_ka_ma5

Bottom and top/inside

efk_62_1_ka_ma3

Front/Outside

efk_62_1_ka_ma2

Front/inside

Assembly instruction flexible chain bracket

efk_32_2_ka_fb_mon

Brass bushes guarantee long-lasting fastening without cold flow in the plastic.

Bracket assembly

Version KA-FB: Integrated through-hole fastened down using screw and nut.

Version KA-FG: Built-in threads allow for quick and easy on-site mounting, since a screw, including a retaining washer where necessary, is sufficient.

Separator

efk_62_1_tr

We recommend that separators be used if multiple round cables or conduits with differing diameters are to be installed. An offset configuration of the separators is advisable.

TR 62    TR 62

RTT 62 RTT 62

Type Order No. Version TI TA H H1 H2 H3 H4 H5 HI
TR 62 062000009200 lockable 3.5 mm 13 mm 5.5 mm 14.8 mm 23.1 mm 31.4 mm 39.7 mm 48 mm 62 mm
RTT 62 100090622000 lockable 8 mm 8 mm 5.5 mm 14.8 mm 23.1 mm 31.4 mm 39.7 mm 48 mm 62 mm

Crossbar connector

efk_62_1_rsv

For frame bridges wider than 246 mm, we recommend the use of crossbar connectors. Their use prevents the frame bridge from separating due to the extra load in the chain.

RSV 63

Type Order No. Designation TI
RSV 62 062000009600 Crossbar connector 8 mm
RSV 62 Alu 062000009800 Crossbar connector for aluminium frame bridges 8 mm

Shelving system

efk_62_1_rs

In connection with at least two shelf supports (RTT) the shelf becomes a shelving system. The additional levels prevent cables from criss-crossing and therefore destroying each other, whilst also avoiding excessive friction. The shelving system may be pre-assembled on request.

Type Order No. Width For inner width
RB 056 - 7 100000005600 56 mm 93 mm
RB 061 - 7 shelf 061 - 7 mm 1000006107 61 mm 93 mm
RB 066 - 7 100000006600 66 mm 93 mm
RB 071 - 7 shelf 071 - 7 mm 1000007107 71 mm 93 mm
RB 076 - 7 shelf 076 - 7 mm 1000007607 76 mm 93 mm
RB 081 - 7 100000008100 81 mm 93 mm
RB 086 - 7 shelf 086 - 7 mm 1000008607 86 mm 93 mm
RB 091 - 7 shelf 091 - 7 mm 1000009107 91 mm 106 mm
RB 096 - 7 shelf 096 - 7 mm 1000009607 96 mm 106 mm
RB 101 - 7 shelf 101 - 7 mm 1000010107 101 mm 106 mm
RB 106 - 7 100000010600 106 mm 106 mm
RB 111 - 7 shelf 111 - 7 mm 1000011107 111 mm 118 mm
RB 116 - 7 100000011600 116 mm 118 mm
RB 121 - 7 shelf 121 - 7 mm 1000012107 121 mm 131 mm
RB 126 - 7 shelf 126 - 7 mm 1000012607 126 mm 131 mm
RB 131 - 7 shelf 131 - 7 mm 1000013107 131 mm 143 mm
RB 136 - 7 shelf 136 - 7 mm 1000013607 136 mm 143 mm
RB 141 - 7 shelf 141 - 7 mm 1000014107 141 mm 143 mm
RB 146 - 7 shelf 146 - 7 mm 1000014607 146 mm 156 mm
RB 151 - 7 shelf 151 - 7 mm 1000015107 151 mm 156 mm
RB 156 - 7 shelf 156 - 7 mm 1000015607 156 mm 156 mm
RB 161 - 7 shelf 161 - 7 mm 1000016107 161 mm 168 mm
RB 166 - 7 100000016600 166 mm 168 mm
RB 171 - 7 shelf 171 - 7 mm 1000017107 171 mm 181 mm
RB 176 - 7 shelf 176 - 7 mm 1000017607 176 mm 186 mm
RB 181 - 7 shelf 181 - 7 mm 1000018107 181 mm 193 mm
RB 186 - 7 shelf 186 - 7 mm 1000018607 186 mm 193 mm
RB 191 - 7 shelf 191 - 7 mm 1000019107 191 mm 193 mm
RB 191 - 7 shelf 191 - 7 mm 1000019107 191 mm 193 mm
RB 196 - 7 shelf 196 - 7 mm 1000019607 196 mm 206 mm
RB 201 - 7 shelf 201 - 7 mm 1000020107 201 mm 206 mm
RB 206 - 7 shelf 206 - 7 mm 1000020607 206 mm 206 mm
RB 211 - 7 shelf 211 - 7 mm 1000021107 211 mm 218 mm
RB 216 - 7 100000021600 216 mm 218 mm

Frame bridge strain relief plate RS-ZL

efk_62_1_rszl

Fixed integrated frame bridge strain relief plates in the chain brackets. Accommodated to all widths of the frame bridges, up to 243 mm in size. May be assembled on the inside and outside bend at both chain endings.

Type Order No. For inner width
RS-ZL 093 - 7 072009300010 93 mm
RS-ZL 106 - 7 072010600010 106 mm
RS-ZL 118 - 7 072011800010 118 mm
RS-ZL 131 - 7 072013100010 131 mm
RS-ZL 143 - 7 072014300010 143 mm
RS-ZL 156 - 7 072015600010 156 mm
RS-ZL 168 - 7 072016800010 168 mm
RS-ZL 181 - 7 072018100010 181 mm
RS-ZL 193 - 7 072019300010 193 mm
RS-ZL 206 - 7 072020600010 206 mm
RS-ZL 218 - 7 072021800010 218 mm
RS-ZL 231 - 7 072023100010 231 mm
RS-ZL 243 - 7 072024300010 243 mm
RS-ZL 256 - 7 072025600010 256 mm

Strain relief with bow clamps

efk_52_1_bak

C-rails (cathodic dipped) for permanent integration, for accommodating the Steel Fix bow clamps in the chain brackets. The bow clamps can take up to 3 cables and are suitable for C-rails with a groove width of 11 mm. Due to the design of the trough elements, a cable preserving cable guidance is ensured. May be assembled on the inside and outside bends at both chain endings. The overall height stated is a guide only. The actual height is, amongst other things, dependent on the diameter and the quality of the cable. A safety distance of 10 mm at the fixed point above the strain relief must be kept during gliding applications.

Extender frame bridge

efk_bs_ma

Large-diameter conduits are routed securely by using a bracket bar (BS). This bar is installed on the frame bridges or the covers of the cable drag chain. The bracket bar can be installed on both the inside and outside bend. The bracket bar support (BSH) is used to attach the bars to PowerLine series frame bridges. Two bracket bar supports are required for each bar. On closed covers and the frame bridges of the HeavyLine series, the bracket bars are secured with screws.

Type Order No. Designation Max conduit dia. Installation height Min inner chain width
BS 120 - 5 052412000000 Extender frame bridge 115 mm 140 mm 164 mm
BS 153 - 5 052415300000 Extender frame bridge 148 mm 170 mm 208 mm
BS 187 - 5 052418700000 Extender frame bridge 182 mm 205 mm 233 mm
BSH- 5 052400000000 Extender frame bridge holder

Lock button

efk_32_verriegelungsknopf

To increase the side stability, we recommend the use of lock buttons during strong lateral acceleration or when installed "laying on the side (turned 90 degrees) without support".

Lockpin4Lockpin5

Type Order No.
MP 52 / 62 / 72 lock button 0520000080

Rear-facing radius

efk_rue_ra
Side links with radius forward (R) and radius backward (Rü) allow for movement in two directions. This is intended for rotating movements and lowered chain brackets. Note: This type of chain has different chain links for the left or right side!

Guide channel systems for cable drag chains serve as trays for short travel distances and at the same time as guides for long travel distances. If no guide channel is used it is possible that the chain links may lay and move incorrectly. Especially for large bend radii as the side guidance does not exist. In most applications the cables/conduits enter the chain at a position central to the travel. This gives the shortest length of chain. In this case the chain is about half as long as the travel distance. If the chain is moved to the left (see illustration below) it simply rolls in the channel. If it is moved to the right, then it stacks on top of itself once the unsupported length has been exceeded. If the movement is further made into direction B the glide rail adjusts the difference in height and guarantees the minimum possible friction. This ensures the optimum free and correct running of the cable drag chain.

Assembly

62.1 assembly

Disassembly

62.1 disassembly

Should the CAD format you desire not be listed, please contact our support team.

Displaying Metric Units