World Leader in the Manufacture and Supply of Injection Molded Cable Management Products 513-201-3069

MP 62.4

MP 62.4
Internal height: 62 mm
Internal widths: 45 - 546 mm
Outside widths: 71 - 572 mm
Radii: 135 - 300 mm
Pitch: 91 mm
Links Per Meter: 11

• REDUCED-COST
• SOFT-STOP SYSTEM
• FLEXIBLE CHAIN BRACKET
• BROAD INTERIOR LAYOUT
• PLASTIC OR ALUMINIUM VERSION

MP-62.4.pdf

Interior/exterior widths
Radii
Interior width (A) Interior height (B) Exterior width (D) Exterior height (C)
45 mm 62 mm 71 mm 84 mm
57 mm 62 mm 83 mm 84 mm
62 mm 62 mm 88 mm 84 mm
71 mm 62 mm 97 mm 84 mm
84 mm 62 mm 110 mm 84 mm
93 mm 62 mm 119 mm 84 mm
96 mm 62 mm 122 mm 84 mm
104 mm 62 mm 130 mm 84 mm
107 mm 62 mm 133 mm 84 mm
121 mm 62 mm 147 mm 84 mm
133 mm 62 mm 159 mm 84 mm
144 mm 62 mm 170 mm 84 mm
146 mm 62 mm 172 mm 84 mm
158 mm 62 mm 184 mm 84 mm
164 mm 62 mm 190 mm 84 mm
171 mm 62 mm 197 mm 84 mm
182 mm 62 mm 208 mm 84 mm
196 mm 62 mm 222 mm 84 mm
208 mm 62 mm 234 mm 84 mm
220 mm 62 mm 246 mm 84 mm
233 mm 62 mm 259 mm 84 mm
246 mm 62 mm 272 mm 84 mm
252 mm 62 mm 278 mm 84 mm
258 mm 62 mm 284 mm 84 mm
296 mm 62 mm 322 mm 84 mm
346 mm 62 mm 372 mm 84 mm
350 mm 62 mm 376 mm 84 mm
358 mm 62 mm 384 mm 84 mm
371 mm 62 mm 397 mm 84 mm
396 mm 62 mm 422 mm 84 mm
421 mm 62 mm 447 mm 84 mm
496 mm 62 mm 522 mm 84 mm
546 mm 62 mm 572 mm 84 mm
Radius (R)
135 mm
150 mm
175 mm
200 mm
250 mm
300 mm

Material characteristics standard (PA/black)

Service temperature: -30 - 120 ° C
Gliding friction factor: 0.30
Static friction factor: 0.45
Fire classification: UL 94 HB

Other information on request

Technical Specifications

Travel distance, gliding Lg: 50 m
Travel distance, self-supporting Lf: See Diagram
Travel distance, vertical, hanging Lvh: 50 m
Travel distance, vertical, upright Lvs: 4 m
Rotated 90°, unsupported L90f: 1 m
Speed, gliding Vg: 5 m /s
Speed, unsupported Vf: 20 m /s
Acceleration, gliding ag: 0 m /s²
Acceleration, unsupported af: 0 m /s²

Self-supporting length

62.4 loading chart

FLg:
Ideal installation situation for high stresses at the limit of the max. travel parameters. In this range the chain upper run is still biased, straight or has a max. sag of 10 – 50 mm depending on the type of chain.

FLb:
Satisfactory installation position for many applications working in the lower to middle range of the max. travel parameters. Depending on the chain type, the sag of the chain upper run is > 10 – 50 mm but less than the max. sag. If the sag is greater than FLb, the application is critical and should be avoided. Please choose a more stable Murrplastik cable drag chain.

Determining the Chain Length

62.4 chain length

L = Travel distance
R = Radius
T = Pitch
E =

Length = L/2 + π × R + 2 × T + E

Chain weight

Weight
Flexible chain bracket KA 62.4

Flexible chain bracket KA 62.4

This chain bracket offers universal connection options (top, bottom and front) and is attached to the end of a chain like a chain link. This allows the chain to move right up to the bracket. Each chain requires one male and one female bracket. M8 bolts are used to secure the brackets in place. Press in metal bushings with a through hole (-FB) ensure the permanent high strength transmission of even extreme forces on the cable drag chain. 

Order Number Type Material Version Pack qty.
0624000050 KA 62.4-F Female end plastic with bushing 1
0624000051 KA 62.4-F male end plastic with bushing 1
0624000052 KA 62.4-F Female end, pendular plastic with bushing 1

Damping Elements for the Side links

The damping elements in the stops facilitate a significantly quieter unrolling of the chain links. The dampers can be chosen optionally.
A reduction of the noise emission by up to 10 dB(A) comparing to the variants without the use of damping elements is possible.

Damping elements

TR 62 Separator

We recommend that separators be used if multiple round cables or conduits with differing diameters are to be installed.

TR 62.4     TR 62.4

TR 62.4 V TR 62.4 V

RTT 62.4   RTT 62.4

Type Order No, Designation Version TI TA H H1 H2 H3 H4 H5 HI
TR 62.4 062400009200 TR 62.4 Separator lockable 3.5 mm 11 mm 4 mm 17 mm 24 mm 31 mm 38 mm 45 mm 62 mm
TR 62.4 -V 062400009300 TR 62.4 -V Separator moveable 3.5 mm 13 mm 4 mm 17 mm 24 mm 31 mm 38 mm 45 mm 62 mm
RTT 62.4 100090624000 Shelf support, divisible lockable 7 mm 11 mm 4 mm 17 mm 24 mm 31 mm 38 mm 45 mm 62 mm

Shelving system

RB 5

In connection with at least two separable shelf supports (RTT), the shelf becomes a shelving system. The additional levels prevent cables from criss-crossing and minimize the friction between them.

 

RS-ZL strain relief

RS ZL 5

Fixed integrated frame bridge strain relief plates in the chain brackets. Tailored to all frame bridge widths up to 246 mm. May be assembled on the inside and outside bends at both chain endings.

Type Order No. For inner width
RS-ZL 045 - 5 052004500010 45 mm
RS-ZL 057 - 5 052005700010 57 mm
RS-ZL 062 - 5 052006200010 62 mm
RS-ZL 071 - 5 052007100010 71 mm
RS-ZL 084 - 5 052008400010 84 mm
RS-ZL 093 - 5 052009300010 93 mm
RS-ZL 096 - 5 052009600010 96 mm
RS-ZL 104 - 5 052010400010 104 mm
RS-ZL 107 - 5 052010700010 107 mm
RS-ZL 121 - 5 052012100010 121 mm
RS-ZL 133 - 5 052013300010 133 mm
RS-ZL 144 - 5 052014400010 144 mm
RS-ZL 146 - 5 052014600010 146 mm
RS-ZL 158 - 5 052015800010 158 mm
RS-ZL 164 - 5 052016400010 164 mm
RS-ZL 171 - 5 052017100010 171 mm
RS-ZL 182 - 5 052018200010 182 mm
RS-ZL 196 - 5 052019600010 196 mm
RS-ZL 208 - 5 052020800010 208 mm
RS-ZL 220 - 5 052022000010 220 mm
RS-ZL 233 - 5 052023300010 233 mm
RS-ZL 246 - 5 052024600010 246 mm

Frame bridge extender

BS 5 bracket

Large-diameter conduits are routed securely by using a bracket bar (BS). This bar is installed on the frame bridges or the covers of the cable drag chain.
The bracket bar can be installed on both the inside and outside bend. The bracket bar support (BSH) is used to attach the bars to PowerLine series frame bridges. Two bracket bar supports are required for each bar.

Type Order No. Designation Max diameter Installation height Min inner chain width
BS 120 - 5 052412000000 Extender frame bridge 115 mm 140 mm 164 mm
BS 153 - 5 052415300000 Extender frame bridge 148 mm 170 mm 208 mm
BS 187 - 5 052418700000 Extender frame bridge 182 mm 205 mm 233 mm
BSH- 5 052400000000 Extender frame bridge holder

Lock button

lock button

To increase the side stability, we recommend the use of lock buttons during strong lateral acceleration or when installed laying on the side (turned 90°) without support.

lock button 1

Type Order No.
MP 52 / 62 / 72 lock button 0520000080

Glide shoes

Glide shoes3

In the case of energy chains, glide shoes (sliding blocks) are used in a horizontally sliding installation mode (the tight side of the chain slides on the slack side). The sliding blocks are set onto the side links on the interior bend instead of the usual frame bridge interlocks; (no tools needed). This forces the chain to slide on the sliding blocks instead on the side links of the chain. Depending on the application, the service life of the energy chain may be extended five-fold, by using sliding blocks.

Order No. Installation site Min radius Glide shoe height
062490400300 Left side link 175 mm 4 mm
062490400302 Right side link 175 mm 4 mm

Reverse radius

62.4 reverse radius

Side links with radius forward (R) and radius backward (Rü) allow for movement in two directions. This is intended for rotating movements and lowered chain brackets. Note: This type of chain has different chain links for the left or right side!

Type Order No. Radius Reverse radius
SR 62.4 (RÜ 200 /R 150.2 ) left 062400015060 150 mm 200 mm
SR 62.4 (RÜ 200 /R 150.1 ) right 062400015062 150 mm 200 mm
SR 62.4 (RÜ 200 /R 200.2 ) left 062400020060 200 mm 200 mm
SR 62.4 (RÜ 200 /R 200 ) right 062400020062 200 mm 200 mm

Guide channel

guide channel

For this cable drag chain, a range of variable guide channel systems are available, constructed from aluminium or stainless steel sections. The variable guide channel ensures that the cable drag chain is supported and guided securely.
For help on choosing, please consult our design engineers.

 

Assembly

62.4 assembly

Disassembly

62.4 dissambly

Should the CAD format you desire not be listed, please contact our support team.

Displaying Metric Units