Component and component location labeling

Label plates for all standard electronic components in the control cabinet and on machinery, such as Protective devices; bus modules, etc. The available label plates can be used on multiple products from different manufacturers. You can make your selection using an easy comparative list


Type SKS

High-quality, halogen-free label plates to snap into the Siemens-Sirius devices. The large printable area at the top allows room for individual project and component reference, dispensing with the need to organise additional systems.


Type KSS

High-quality, halogen-free label plates to snap into devices. The large printable area at the top allows room for individual project and component reference, dispensing with the need to organise additional systems. Adapters render the label holders usable for component location labeling. Multiframe compatible with other manufacturers.


Type KSA

High-quality, halogen-free label plates to snap into devices. The large printable area at the top allows room for individual project and component reference, dispensing with the need to organise additional systems. Adapters render the label holders usable for component location labeling.


Type KTE

High-quality, halogen-free label plates to snap into devices. The large printable area at the top allows room for individual project and component reference, dispensing with the need to organise additional systems. Adapters render the label holders usable for component location labeling.


Type KAB

High-quality, halogen-free label plates to snap into devices. The large printable area at the top allows room for individual project and component reference, dispensing with the need to organise additional systems.


Type ABB

High-quality, halogen-free label plates to snap into devices. The large printable area at the top allows room for individual project and component reference, dispensing with the need to organise additional systems. Adapters render the label holders usable for component location labeling.


Type KMO

High-quality, halogen-free label plates to snap into devices. The large printable area at the top allows room for individual project and component reference, dispensing with the need to organise additional systems.


Type KS

High-quality, halogen-free label plates to snap into devices. The large printable area at the top allows room for individual project and component reference, dispensing with the need to organise additional systems.


Type KSF

High-quality, halogen-free label plates to snap into devices. The large printable area at the top allows room for individual project and component reference, dispensing with the need to organise additional systems. Adapters render the label holders usable for component location labeling.


Type KSL

High-quality, halogen-free label plates to snap into devices. The large printable area at the top allows room for individual project and component reference, dispensing with the need to organise additional systems.


Type KES

High-quality, halogen-free label plates to snap into devices. The large printable area at the top allows room for individual project and component reference, dispensing with the need to organise additional systems. Adapters render the label holders usable for component location labeling.


Type KPF

High-quality, halogen-free label plates to snap into devices. The large printable area at the top allows room for individual project and component reference, dispensing with the need to organise additional systems. Adapters render the label holders usable for component location labeling.


Type WGO

High-quality, halogen-free label plates to snap into devices. The large printable area at the top allows room for individual project and component reference, dispensing with the need to organise additional systems.


Type B+R

High-quality, halogen-free label plates to snap into devices. The large printable area at the top allows room for individual project and component reference, dispensing with the need to organise additional systems.


KSK type (universal adhesive label)

High-quality, halogen-free adhesive label plates. The large printable area at the top allows room for individual project and component reference, dispensing with the need to organise additional systems. The flat construction allows the label holder to be used as a component location marker inside the top hat rail.


TYPE KSZ

High-quality, halogen-free label plates for marking Harting connector housings (heavy connectors).


KM 2/KM 20 type (adhesive holder)

High-quality, transparent adhesive label holders. If the bonding surface is prepared properly the acrylic adhesive can form a permanent bond.


Type KM

High-quality, transparent label holder for component labeling. Mounted with cable ties.


Type KM-B

High-quality, blue-colored flexible label holders for labeling wires, cables and conduits. They hold the idents (BK) and the ACS labels type KS, KSO or DM. The label holders are fixed in place with cable ties.


KM 6 type

High-quality, transparent label holder for component labeling. Assembly is via snap-in action. Adapters render the label holders usable for component location labeling.


Type BS

For the subsequent labeling of control gear or component location. The BS 9/10 label holder is secured by means of a self-clamping (spring-loaded) base.


type SKDL/E (for cable guide rail type KDL/E)

The labeling set for the KDL/E cable entry system was developed as a simple means of accommodating a great deal of labeling information in or on the KDL/E cable entry system. There are various versions available adapted to the different cable entry systems. The set consists of holder, label rail, plug and transparent cover. The label rail can hold the KS 15/... labels.


Type BZS/F labeling system

The BZS system was developed as a simple means of accommodating a great deal of labeling information in or on the control cabinet. The BZS system is extremely versatile. The labeling rail with the snap-in labels provides vertical and horizontal designation of terminal blocks and other components. The system can be fitted on the top hat rail, C-rail or the cable duct. The label holders and their cover can be cut to any length. The labels are simply clicked into the label holder. Label rail for component location labeling – provides a base for gluing. For riveting, screwing, or gluing. The transparent cover is recommended to keep the label plates clean and free of mechanical stresses.


BZS type (9 mm label rail)

Label rail for component location labeling – provides a base for gluing. For riveting, screwing, or gluing. Pre-punched holes (distance between holes 100 mm; hole diameter 4 mm).


BZS type (15 mm label rail)

Label rail for component location labeling providing a base for gluing. The transparent cover is recommended to keep the label plates clean and free of mechanical stresses.


BZS labeling system

The BZS system was developed as a simple means of accommodating a great deal of labeling information in or on the control cabinet. The BZS system is extremely versatile. The labeling rail with the snap-in labels provides vertical and horizontal designation of terminal blocks and other components. The system can be fitted on the top hat rail, C-rail or the cable duct. The label holders can be cut to any length. The labels are simply clicked into the label holder.


BZS labeling system accessories

The BZS labeling system can be tailored to any labeling requirement , offering horizontal or vertical inscriptions for control cabinets, labeling outside or within control cabinets, any length of label carriers and any number of label plates. The BSZ system meets your every need.


KSO/KS type

High-quality, halogen-free label plates for equipment location labeling with BZS label rail or KM adhesive holder. The large printable area at the top allows room for individual project and component location reference, dispensing with the need to organise additional systems.


ELW/ELG/ELPT type label plate

Self-adhesive consecutive labels on A4 sheets.


Label plate type ELO (Siemens S7 component group)

High-quality sheet labels for single-line and multi-line inscription of Siemens S7 component groups. The labels are laid out on DIN A4 sheets. Labels on carrier foil are suitable for laser printers. The sheet can be divided into DIN A5 if required. Perforated labels for printing with the labeling systems Pictor, plotters and laser printers. The labels are easily separated at the perforation.


EDG type label plate

Self-adhesive consecutive textile labels with zig-zag fold and punched hole margin for matrix printers.