Displaying Metric Units

Accessories for cable entry systems and plates

Blanking plate with different properties for closing non-used cut-outs. Adapter plate to reduced 24-pin cut-outs to 16-pin cut-outs. Adapter plates and floor sheeting for control cabinets from various manufacturers. Easy-to-handle EMC discharge plates for cable entry systems.


Control cabinet floor plate, type SBB

The control cabinet floor plate can be installed in Rittal (type CM and TS8) control cabinets. Up to 5 cable entry systems, type KDL/E 24 can be installed. Locking plates, type VP24, are included with the control cabinet floor plates. These are required to lock the floor sheeting into place. Non-required cut-outs can be closed with the BP/H 24 blanking plate. Protection class IP 54 when installed properly as a system (control cabinet + floor sheeting) Entire system can be retrofitted Earthing points (M6 and M8) available on both sides


KDP/H conduit connection

The conduit connection KDP/H enables a connection to our cable protection conduits Murrflex M50/P48 with standard corrugation on the cable entry plates from type KDP/N 24 The conduit connection is comprised of a lower part that is screwed together with the cable entry plate and an upper part that engages with the lower part after the cables have been feed through the cable entry plate without tools. Wiring protection Protectiong from dirt and water jets Simple assembly and disassembly Compact form factor For all Murrflex conduits in size M50/P48 with standard corrugation


Blanking plate (plastic)

The blanking plates are suited for sealing cut-outs for 16- or 24-pole connectors. Integrated seal


EMC module Type KDP/N 24/xx EMC module

The Murrplastik KDP/N EMC module is designed to dissipate line and field induced interference. The KDP/N 24-EMC modules are used in conjunction with the KDP/N 24 cable entry system. While the EMC module makes direct contact with the enclosure wall on the inside of the enclosure, the KDP/N 24 entry plate provides mechancial protection against dust and liquids. Highly compact, very low profile form factor Housing from stainless steel (V2A) 360° shield contact to reduce cable wear Large contact surface, short distance Very simple to install Easily-viewed contact area


Discharge plate, type KDL-AB and KDL/N-AB

The KDL and KDL/E discharge plates are suited for discharging interference which may occur on cable sheaths. The discharge plate should be installed on the inside of the control cabinet, directly at the fixing points of the KDL or KDL/E cable entry system.


Blanking plate (metal version)

Blanking plate for closing off unused adapter positions and cut-outs. The stainless steel version is particularly suitable for application in the food and chemical areas. Integrated threaded bolts mean that no screws are visible from outside. Mounting set included in delivery.


Adapter plate Rittal

The Rittal adapter plates can be directly mounted into the prefabricated cut-outs from Rittal casings. They serve to retain various Murrplastik cable entry systems. Unused adapter spaces can be closed off using blanking plates. A blade terminal L6.3 is available for earthing the adapter plate. Adapter plate without sealing. The seal is part of the cabinet accessories.


Adapter plate Sarel

Adapter plate can be fitted directly into the standard cut-outs of Sarel cabinets. They serve to retain various Murrplastik cable entry systems. Unused adapter positions can be closed off using blanking plates of type BP. A blade terminal L6.3 is available for earthing the adapter plate. Adapter plate without sealing. The seal is part of the cabinet accessories.


Adapter plate Lohmeier

The Lohmeier adapter plates can be directly mounted into the prefabricated cut-outs from Lohmeier casings. They serve to retain various Murrplastik cable entry systems. Unused adapter spaces can be closed off using blanking plates. A blade terminal L6.3 is available for earthing the adapter plate. Adapter plate come with seal included.


Adapter plate Ensto

The Ensto adapter plates can be directly mounted into the prefabricated cut-outs from Ensto casings. They serve to retain various Murrplastik cable entry systems. Unused adapter spaces can be closed off using blanking plates. A blade terminal L6.3 is available for earthing the adapter plate. Adapter plate without sealing. The seal is part of the cabinet accessories.