New MP 35 chain for lighter duty applications

Easy to install energy chain for lower load applications.

Murrplastik Systems presents the new MP 35, an easy-to-install energy chain for lighter duty applications. This low-cost energy chain with widths from 50 to 175 mm and with radii from 63 to 250 mm is suitable for short, fast applications with high driving dynamics, when used with handling and assembly robots for example. The chain links can be opened either on the outside (MP 35.1) or on the inside bend (MP 35.2).

In lower duty applications, such as when used with handling and assembly robots today, high quality demands are placed on the energy chains in terms of payload, speed and the length of the travel path. The new MP 35 with a total of 512 variants is appropriate for this purpose. Murrplastik offers the MP 35 with inside widths of 50, 65, 75, 90, 100, 125, 150 and 175 mm as well as with radii of 63, 75, 100, 125, 150, 175, 200 and up to 250 mm. The MP 35 has an internal height of 35 mm. The pitch is 18 chain links per meter.

The MP 35 offers a very flexible shelving system and divisible shelf supports that make it much easier to equip the energy chain with cables. Due to a multitude of possible combinations, the ideal shelving system can be put together for every application. The shelf dividers snap into the frame bars and cannot slip. With every installation variant, the cables remain in the original position. That means longer life.

Leave a Reply

Your email address will not be published. Required fields are marked *